홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Hydroxide → HCID 178504115, 화합물

HRID 437544
인쇄

반응식

HRID 437544 반응식
[CH3:1][S:2][CH2:3][C:4]1[C:5](=[CH:7][CH:8]=[C:9]([C:11]([F:14])([F:13])[F:12])[CH:10]=1)[NH2:6].ClN1C(=[O:21])CCC1=O.[OH-].[Na+]>C(Cl)Cl>[CH3:1][SH:2]1(=[O:21])[CH2:3][C:4]2[CH:10]=[C:9]([C:11]([F:12])([F:13])[F:14])[CH:8]=[CH:7][C:5]=2[NH:6]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 14798Sodium HydroxideHCID 31398ChlorosuccinimideHCID 98132532-[(Methylthio)methyl]-4-(trifluoromethyl)benzenamine

생성물 1

HCID 178504115HCID 178504115, 화합물

시약·촉매·용매 1

HCID 6344Dichloromethane용매2회

반응 조건

온도
5 °C

실험 절차

To 10.2 g. of α-methylthio-4-trifluoromethyl-o-toluidine predissolved in 50 ml. of methylene chloride and cooled to -38° C. is added dropwise, over 40 minutes, a solution of 6.2 g. of N-chlorosuccinimide predissolved in 250 ml. of methylene chloride, while the temperature is maintained between -28° and -38° C. After an additional 8 minutes, 13.3 ml. of a 15% aqueous sodium hydroxide solution is added, the cold bath is removed and the reaction mixture allowed to warm to 5° C. To the reaction mixture is added 100 ml. of water, the mixture is shaken, and the phases are separated. The methylene chloride layer is cooled to -20° C. and treated with a solution of 9.7 g. of m-chloroperoxybenzoic acid predissolved in 150 ml. of methylene chloride, added dropwise over 10 minutes. The cold bath is removed and the reaction mixture stirred for 20 minutes, after which time, it is washed successively with an aqueous solution of sodium sulfite and sodium bicarbonate and a saturated aqueous solution of sodium bicarbonate. The phases are separated and the methylene chloride layer is dried, evaporated in vacuo to dryness, and the residue recrystallized from chloroform/petroleum ether to yield 2-methyl-5-trifluoromethyl-2H,3H-2,1-benzisothiazole-S-oxide, m.p. 151°-154° C.

후처리

  1. additionis added dropwise, over 40 minutes
  2. customthe cold bath is removed
  3. additionTo the reaction mixture is added 100 ml
  4. customthe phases are separated
  5. temperatureThe methylene chloride layer is cooled to -20° C.
  6. additiontreated with a solution of 9.7 g
  7. additionof methylene chloride, added dropwise over 10 minutes
  8. customThe cold bath is removed
  9. stirringthe reaction mixture stirred for 20 minutes
  10. washafter which time, it is washed successively with an aqueous solution of sodium sulfite and sodium bicarbonate
  11. customThe phases are separated
  12. dry with materialthe methylene chloride layer is dried
  13. customevaporated in vacuo to dryness
  14. customthe residue recrystallized from chloroform/petroleum ether

출처 및 근거

ORD 기록
ord-bbf25af4f2ce43bba86617b46849cdb8
출처 데이터셋
uspto-grants-1977_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04031227

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트