홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetic Acid → (E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbaldehyde

HRID 447433
노트
인쇄 미리보기

반응식

HRID 447433 반응식
[N:1]1[CH:6]=[CH:5][CH:4]=[C:3](/[CH:7]=[CH:8]/[C:9]2[C:17]3[C:12](=[CH:13][C:14]([C:18]#N)=[CH:15][CH:16]=3)[NH:11][N:10]=2)[CH:2]=1.CC(O)=[O:22].CN(C=O)C.[PH2]([O-])=O.[Na+]>N1C=CC=CC=1.O.[Ni]>[N:1]1[CH:6]=[CH:5][CH:4]=[C:3](/[CH:7]=[CH:8]/[C:9]2[C:17]3[C:12](=[CH:13][C:14]([CH:18]=[O:22])=[CH:15][CH:16]=3)[NH:11][N:10]=2)[CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 176Acetic AcidHCID 6228DimethylformamideHCID 66734132(E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbonitrileHCID 178527019HCID 178527019, 화합물

생성물 1

HCID 86651944(E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbaldehyde수율 50%

시약·촉매·용매 3

HCID 935
Nickel
촉매
HCID 962Water용매3회
HCID 1049Pyridine용매

반응 조건

온도
0 °C

실험 절차

To a suspension of (E)-3-(2-(pyridin-3-yl)vinyl)-1H-indazole-6-carbonitrile (984 mg, 3 mmol) in pyridine (30 mL) was added HOAc (8 mL), followed by DMF (30 mL). The resulting mixture was heated and sonicated to make a clear solution. After cooling to 0° C., a solution of sodium hypophosphite (1.408 g, 16 mmol) in H2O (8 mL) was added, followed by Raney-Nickel 2400 (slurry in H2O, 0.8 mL). The resulting mixture was heated at 60° C. (oil temp.) for 1 h before cooling to rt. H2O (50 mL) was added and the mixture was extracted with EtOAc (100 mL+50 mL×2). The combined extracts were dried (Na2SO4). Removal of low boiling point solvents gave a yellow solution in DMF (30 mL); H2O (500 mL) was added with swirling and a yellow precipitate formed. After standing 10 min, the resulting precipitate was collected by suction filtration, rinsed with H2O and dried under high vacuum to give the title compound (500 mg, 50%) as a yellow solid. 1H NMR (400 MHz, DMSO-d6) δ 13.79 (s, 1H, NH), 10.14 (s, 1H, CHO), 8.90 (s, 1H), 8.48 (d, J=4.8 Hz, 1H), 8.39 (d, J=8.0 Hz, 1H), 8.19 (d, J=9.2 Hz, 1H, partially overlapping with the singlet at 8.18 ppm), 8.18 (s, 1H, partially overlapping with the doublet at 8.19 ppm), 7.75 (d, J=16.4 Hz, 1H), 7.69 (d, J=8.4 Hz, 1H), 7.59 (d, J=16.8 Hz, 1H), 7.43 (dd, J=8.0 Hz, 5.2 Hz, 1H); MS ESI 250.0 [M+H]+, calcd for [C15H11N3O+H]+ 250.1.

후처리

  1. temperatureThe resulting mixture was heated
  2. customsonicated
  3. temperatureThe resulting mixture was heated at 60° C. (oil temp.) for 1 h
  4. temperaturebefore cooling to rt
  5. extractionthe mixture was extracted with EtOAc (100 mL+50 mL×2)
  6. dry with materialThe combined extracts were dried (Na2SO4)
  7. customRemoval of low boiling point solvents
  8. customgave a yellow solution in DMF (30 mL)
  9. customa yellow precipitate formed
  10. filtrationthe resulting precipitate was collected by suction filtration
  11. washrinsed with H2O
  12. customdried under high vacuum

출처 및 근거

ORD 기록
ord-952265988c9b44629a4700e60cfcc71f
출처 데이터셋
uspto-grants-2013_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08481525B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트