홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

2-(Dimethylamino)ethanol → [2-(3-Isopropoxy-4-nitrophenoxy)ethyl]dimethylamine

HRID 448380
노트
인쇄 미리보기

반응식

HRID 448380 반응식
[CH3:1][N:2]([CH3:6])[CH2:3][CH2:4][OH:5].[OH-].[K+].F[C:10]1[CH:15]=[CH:14][C:13]([N+:16]([O-:18])=[O:17])=[C:12]([O:19][CH:20]([CH3:22])[CH3:21])[CH:11]=1>CCCCCCCC[N+](CCCCCCCC)(CCCCCCCC)C.[Cl-]>[CH:20]([O:19][C:12]1[CH:11]=[C:10]([CH:15]=[CH:14][C:13]=1[N+:16]([O-:18])=[O:17])[O:5][CH2:4][CH2:3][N:2]([CH3:6])[CH3:1])([CH3:22])[CH3:21]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 79022-(Dimethylamino)ethanolHCID 14797Potassium HydroxideHCID 106318324-Fluoro-1-nitro-2-(propan-2-yloxy)benzene

생성물 1

HCID 58307279[2-(3-Isopropoxy-4-nitrophenoxy)ethyl]dimethylamine수율 55%

시약·촉매·용매 1

HCID 21218Trioctylmethylammonium chloride촉매

반응 조건

온도
80 °C

실험 절차

N,N-Dimethylethanolamine (1.6 g, 18 mmol) was added to a mixture of powdered KOH (1.0 g, 18 mmol) and Aliquat 336 (0.72 g, 1.8 mmol), and the resulting mixture was stirred for 5 minutes at 80° C. Then 4-fluoro-2-isopropoxy-1-nitrobenzene (3.0 g, 15 mmol) was added, and stirring proceeded at this temperature for 30 minutes. The mixture was cooled and partitioned between methylene chloride (100 mL) and dilute aqueous HCl (100 mL), and the organic layer was extracted with dilute aqueous HCl (2×100 mL). The combined aqueous phases were washed with methylene chloride (3×150 mL), basified (3N NaOH), and extracted with methylene chloride (3×100 mL). The combined organic extracts were washed with water (3×100 mL), dried (MgSO4), and evaporated, providing 2.2 g as a yellow oil, in 55% yield; 1H NMR (CDCl3) δ 1.40 (d, J=6.1 Hz, 6H), 2.34 (s, 6H), 2.74 (t, J=5.6 Hz, 2H), 4.10 (t, J=5.6 Hz, 2H), 4.61 (septet, J=6.1 Hz, 1H), 6.48 (dd, J=9.1 Hz, J=2.5 Hz, 1H), 6.57 (d, J=2.5 Hz, 1H), 7.91 (d, J=9.1 Hz, 1H).

후처리

  1. stirringstirring
  2. waitproceeded at this temperature for 30 minutes
  3. temperatureThe mixture was cooled
  4. custompartitioned between methylene chloride (100 mL) and dilute aqueous HCl (100 mL)
  5. extractionthe organic layer was extracted with dilute aqueous HCl (2×100 mL)
  6. washThe combined aqueous phases were washed with methylene chloride (3×150 mL)
  7. extractionextracted with methylene chloride (3×100 mL)
  8. washThe combined organic extracts were washed with water (3×100 mL)
  9. dry with materialdried (MgSO4)
  10. customevaporated
  11. customproviding 2.2 g as a yellow oil

출처 및 근거

ORD 기록
ord-06fa1a3835784defa51901fbd9cb2bc5
출처 데이터셋
uspto-grants-2013_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08481568B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트