홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 4687-08-5

HRID 45983
노트
인쇄 미리보기

반응식

HRID 45983 반응식
C[C@H]([O:10][C:11](=[O:31])[C@@H:12]([C:24]1[CH:29]=[CH:28][C:27]([Cl:30])=[CH:26][CH:25]=1)[O:13][C:14]1[CH:19]=[CH:18][CH:17]=[C:16]([C:20]([F:23])([F:22])[F:21])[CH:15]=1)C(=O)N1CCCC1.O.Cl>C1(C)C=CC=CC=1>[Cl:30][C:27]1[CH:26]=[CH:25][C:24]([CH:12]([O:13][C:14]2[CH:19]=[CH:18][CH:17]=[C:16]([C:20]([F:21])([F:22])[F:23])[CH:15]=2)[C:11]([OH:31])=[O:10])=[CH:29][CH:28]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 313Hydrochloric AcidHCID 962WaterHCID 16656967HCID 16656967, 화합물

생성물 1

HCID 99494114687-08-5

시약·촉매·용매 1

HCID 1140Toluene용매

반응 조건

온도
80 °C

실험 절차

To the residue prepared in STEP C above was added water (10 g) and a 36-38% HCl solution (60 g). The resulting biphasic mixture was stirred at 80° C. for between about 4 and about 8 hours (till completion of the hydrolysis as determined by HPLC) The resulting mixture was then cooled to 60° C. and toluene (125 mL) added. The aqueous phase was discarded and the organic phase washed with water (50 mL). Toluene (about 80 g) was removed by distillation to dry the organic phase. The resulting solution was then cooled to 70° C. and petrol ether 60/90 (250 mL) was added. The resulting solution was further cooled to 37° C. and seeded. The resulting mixture was stirred for 30 minutes at 37° C., the resulting suspension then cooled to 0° C. over about 2.5 hours. The precipitated crystals were filtered off and washed with a mixture of toluene (5 mL 0 and petrol ether 60/90 (9 mL) to yield wet product. The wet product was dried in a vacuum at 30° C. to yield the title compound as an off-white solid.

후처리

  1. customtill completion of the hydrolysis
  2. temperaturewas then cooled to 60° C.
  3. washthe organic phase washed with water (50 mL)
  4. customToluene (about 80 g) was removed by distillation
  5. customto dry the organic phase
  6. temperatureThe resulting solution was then cooled to 70° C.
  7. additionpetrol ether 60/90 (250 mL) was added
  8. temperatureThe resulting solution was further cooled to 37° C.
  9. stirringThe resulting mixture was stirred for 30 minutes at 37° C.
  10. temperaturethe resulting suspension then cooled to 0° C. over about 2.5 hours
  11. filtrationThe precipitated crystals were filtered off
  12. washwashed with a mixture of toluene (5 mL 0 and petrol ether 60/90 (9 mL)
  13. customto yield wet product
  14. customThe wet product was dried in a vacuum at 30° C.

출처 및 근거

ORD 기록
ord-11667b9b5cf5496e85a92abe7dfdf376
출처 데이터셋
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08541614B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트