홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acrylic Acid → 2-Propenoic acid, 2-methoxy-2-oxoethyl ester

HRID 464439
노트
인쇄 미리보기

반응식

HRID 464439 반응식
[C:1]([OH:5])(=[O:4])[CH:2]=[CH2:3].Br[CH2:7][C:8]([O:10][CH3:11])=[O:9].C(OCC)(=O)C>C(N(CC)CC)C>[C:1]([O:5][CH2:7][C:8]([O:10][CH3:11])=[O:9])(=[O:4])[CH:2]=[CH2:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6581Acrylic AcidHCID 8857Ethyl AcetateHCID 60984Methyl bromoacetate

생성물 1

HCID 142050872-Propenoic acid, 2-methoxy-2-oxoethyl ester

시약·촉매·용매 1

HCID 8471Triethylamine용매2회

반응 조건

온도
15 °C

실험 절차

Into a five-liter, three-necked, round-bottom flash (equipped with a mechanical stirrer, a thermometer and a one-liter dropping funnel topped with a drying tube) were placed 527.9 mls. of acrylic acid, 662.7 mls. of methyl bromoacetate and 1750 mls. of ethyl acetate. The resulting solution was cooled to about 15° C. and 1073.2 mls. of triethylamine were added over a period of about one hour. An exotherm was noted and reaction temperature was maintained between 15° and 25° C. with an ice/salt cooling bath. Upon completion of the triethylamine addition, the cooling bath was removed and the reaction mixture was stirred at room temperature (25° to 30° C.) overnight. The resulting thick slurry was poured into 1750 mls. of distilled water and the organic layer was separated. The aqueous layer was extracted with ethyl acetate (two times, 500 mls. each) and the combined organic portions were washed successively with 500 mls. of 0.5N hydrochloric acid, 500 mls. of saturated aqueous sodium bicarbonate and, then, with 500 mls. of saturated aqueous sodium chloride. The organic solution (about 3.5 to 3.75 liters) was then dried (magnesium sulfate) and evaporated in vacuo (water aspirator) at ≤30° C. to provide a very pale-yellow product. The product was purified by addition of one gram of 2,6-di-tert-butyl-p-cresol as a free radical inhibitor and vacuum distilling through a distillation column. The purified product exhibited a boiling point of 50° C. (1.2 mm.) to 56° C. (1.9 mm.).

후처리

  1. customInto a five-liter, three-necked, round-bottom flash (equipped with a mechanical stirrer
  2. customa thermometer and a one-liter dropping funnel topped with a drying tube
  3. customreaction temperature
  4. temperaturecooling bath
  5. customthe cooling bath was removed
  6. additionThe resulting thick slurry was poured into 1750 mls
  7. customof distilled water and the organic layer was separated
  8. extractionThe aqueous layer was extracted with ethyl acetate (two times, 500 mls
  9. washeach) and the combined organic portions were washed successively with 500 mls
  10. dry with materialThe organic solution (about 3.5 to 3.75 liters) was then dried (magnesium sulfate)
  11. customevaporated in vacuo (water aspirator) at ≤30° C.
  12. customto provide a very pale-yellow product
  13. customThe product was purified by addition of one gram of 2,6-di-tert-butyl-p-cresol as a free radical inhibitor and vacuum
  14. distillationdistilling through a distillation column
  15. customto 56° C.

출처 및 근거

ORD 기록
ord-eea1b05923874e40ab554aa54460be58
출처 데이터셋
uspto-grants-1985_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04547451

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트