홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Ethylene → 2-Vinyl-6-methoxynaphthalene

HRID 482162
인쇄

반응식

HRID 482162 반응식
Br[C:2]1[CH:11]=[CH:10][C:9]2[C:4](=[CH:5][CH:6]=[C:7]([O:12][CH3:13])[CH:8]=2)[CH:3]=1.[CH2:14](N(CC)CC)[CH3:15].C=C.[OH-].[Na+].Br.C(N(CC)CC)C>Cl[Pd]Cl.C(C(CC)=O)C>[CH3:13][O:12][C:7]1[CH:8]=[C:9]2[C:4](=[CH:5][CH:6]=1)[CH:3]=[C:2]([CH:14]=[CH2:15])[CH:11]=[CH:10]2
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 6325EthyleneHCID 8471TriethylamineHCID 14798Sodium HydroxideHCID 787862-Bromo-6-methoxynaphthaleneHCID 2734074Triethylammonium bromide

생성물 1

HCID 6035352-Vinyl-6-methoxynaphthalene

시약·촉매·용매 2

HCID 24290
Palladium Chloride
촉매
HCID 7288Ethyl ketone용매

반응 조건

온도
95 °C

실험 절차

To a 5-gallon stainless steel electrically heated reactor is added 1,485 grams (6.26 mol) of 2-bromo-6-methoxynaphthalene (BMN) (produced as in Example 7 hereof, added as a dry powder through a 2" opening in the reactor head), 672 grams (6.64 mol) of triethylamine, 0.56 grams of PdCl2 (3.2 mmol) and 6.2 grams of NMDP (19 mmol). The reactor is purged three times with nitrogen (50 psig) and then three times with ethylene (50 psig). The reactor is charged with ethylene (about 300 psig) and then warmed at 95° C. Ethylene pressure in the reactor is raised to about 550 psig after reaching reaction temperature. When the reaction is completed, the reaction mixture is cooled to below 50° C. and the ethylene is vented. Diethyl ketone (3,835 g) is added to the reaction mixture. Aqueous sodium hydroxide (24.8 wt %) is then added to the reaction mixture to neutralize the triethylamine hydrobromide salt formed during the reaction. The aqueous phase is removed, as well as possible at this point, from the reactor. The reaction mixture is filtered using a medium porosity 3-liter sintered glass funnel and any further aqueous phase that separates is removed. The volatile organics (acetonitrile, diethyl ketone, triethylamine) are removed at reduced pressure (1 mm Hg, 45° C.) to give 6-methoxy-2-vinylnaphthalene as a yellow solid.

후처리

  1. customproduced as in Example 7
  2. additionadded as a dry powder through a 2"
  3. customThe reactor is purged three times with nitrogen (50 psig)
  4. additionThe reactor is charged with ethylene (about 300 psig)
  5. temperatureEthylene pressure in the reactor is raised to about 550 psig
  6. customreaction temperature
  7. temperaturethe reaction mixture is cooled to below 50° C.
  8. customformed during the reaction
  9. customThe aqueous phase is removed
  10. filtrationThe reaction mixture is filtered
  11. customany further aqueous phase that separates is removed
  12. customThe volatile organics (acetonitrile, diethyl ketone, triethylamine) are removed at reduced pressure (1 mm Hg, 45° C.)

출처 및 근거

ORD 기록
ord-ed75f97fb4d04c68b12c8d5500858c77
출처 데이터셋
uspto-grants-1998_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05792886

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트