홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetic Acid → 7H-Naphtho(1,2,3-ij)(2,7)naphthyridin-7-one

HRID 483831
노트
인쇄 미리보기

반응식

HRID 483831 반응식
COC(OC)[N:4]([CH3:6])[CH3:5].[CH3:9][C:10]1[CH:11]=[CH:12][N:13]=C2[C:24](=[O:25])[C:23]3[CH:22]=[CH:21][CH:20]=[CH:19][C:18]=3[C:16](=O)[C:15]=12.[Cl-].[NH4+].C(O)(=O)C>CN(C)C=O>[CH:20]1[CH:21]=[CH:22][C:23]2[C:24](=[O:25])[C:5]3[C:15]4[C:10]([CH:9]=[CH:6][N:4]=3)=[CH:11][CH:12]=[N:13][C:16]=4[C:18]=2[CH:19]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 176Acetic AcidHCID 25517Ammonium ChlorideHCID 78373Dimethylformamide dimethyl acetalHCID 4577324-Methylbenzo(g)quinoline-5,10-dione

생성물 1

HCID 3871957H-Naphtho(1,2,3-ij)(2,7)naphthyridin-7-one수율 79%

시약·촉매·용매 1

HCID 6228Dimethylformamide
용매

실험 절차

Dimethylformamide dimethyl acetal (1.50 mL, 11.34 mmol, Aldrich) was added to a solution of cleistopholine, (1.95 g, 8.73 mmol) in dimethylformamide (5 mL). The mixture was then heated for 30 min by submerging the reaction vessel into an oil bath preheated to 120° C. At this point, ammonium chloride (4.5 g) and glacial acetic acid (15 mL) were added to the reaction and the heating (120° C.) continued for an additional 30 min. After allowing to cool, the reaction was poured onto water (200 mL) and partitioned with methylene chloride (5×100mL). The combined organic phases were washed with saturated sodium bicarbonate solution (3×100 mL), water (3×100 mL), dried over potassium carbonate, and concentrated to dryness. The residual dark brown solids were chromatographed on silica gel (4×70 cm column, Merck 230-400 mesh) while eluting with ethyl acetate. Concentration of the appropriate column fractions provided pure sampangine (1.60 g, 79%), mp 220-222 (lit. mp 216°-218° C.). IR 1670, 1615, 1590, 1400, 1380, 1320, 1275, 1225, 760, 725 cm-1 ; 1H and 13C NMR.

후처리

  1. temperatureThe mixture was then heated for 30 min
  2. custompreheated to 120° C
  3. temperatureto cool
  4. additionthe reaction was poured onto water (200 mL)
  5. custompartitioned with methylene chloride (5×100mL)
  6. washThe combined organic phases were washed with saturated sodium bicarbonate solution (3×100 mL), water (3×100 mL)
  7. dry with materialdried over potassium carbonate
  8. concentrationconcentrated to dryness
  9. customThe residual dark brown solids were chromatographed on silica gel (4×70 cm column, Merck 230-400 mesh)
  10. washwhile eluting with ethyl acetate

출처 및 근거

ORD 기록
ord-1bc3e3068def43c69b629f527c7d3707
출처 데이터셋
uspto-grants-1993_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05227383

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트