홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Methyl iodide → Methyl 4-fluoro-alpha-methylbenzeneacetate

HRID 494496
노트
인쇄 미리보기

반응식

HRID 494496 반응식
[F:1][C:2]1[CH:7]=[CH:6][C:5]([CH2:8][C:9]([O:11][CH3:12])=[O:10])=[CH:4][CH:3]=1.[CH3:13][Si](C)(C)[N-][Si](C)(C)C.[Li+].CI>O1CCCC1>[F:1][C:2]1[CH:3]=[CH:4][C:5]([CH:8]([CH3:13])[C:9]([O:11][CH3:12])=[O:10])=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6328Methyl iodideHCID 2733233Methyl 2-(4-fluorophenyl)acetateHCID 2733832Lithium Hexamethyldisilazide

생성물 1

HCID 11389760Methyl 4-fluoro-alpha-methylbenzeneacetate수율 87.1%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매2회

반응 조건

온도
-78 °C

실험 절차

A solution of the compound of Example 14A (23.2 g, 0.138 mol) in dry tetrahydrofuran (30 mL) was added dropwise over 30 min to a −78° C. solution of lithium hexamethyldisilazide (prepared from hexamethyldisilazane (35 mL, 0.165 mol) and n-butyllithium in hexane (2.5 M, 58 mL, 0.145 mol)) in dry tetrahydrofuran (100 mL). The solution was stirred at −78° C. for 1 h, and then a large excess of methyl iodide was added. The solution was stirred at −78° C. for 30 min and was then warmed to ambient temperature for 18 h. The solution was quenched by addition of saturated ammonium chloride solution and diluted with water. The mixture was concentrated in vacuo to remove tetrahydrofuran and then extracted with ethyl acetate. The organic layer was extracted with water (2×) and saturated NaCl solution, followed by drying (Na2SO4) and concentration in vacuo. The residue was distilled under reduced pressure (70-75° C./0.5 mm Hg) to afford the title compound (21.9 g, 87%) as a colorless oil. 1H NMR (300 MHz, CDCl3): δ 1.49 (d, J=7.35 Hz, 3 H) 3.70 (m, 4 H) 7.01 (m, 2 H) 7.27 (m, 2 H).

후처리

  1. stirringThe solution was stirred at −78° C. for 30 min
  2. temperaturewas then warmed to ambient temperature for 18 h
  3. customThe solution was quenched by addition of saturated ammonium chloride solution
  4. additiondiluted with water
  5. concentrationThe mixture was concentrated in vacuo
  6. customto remove tetrahydrofuran
  7. extractionextracted with ethyl acetate
  8. extractionThe organic layer was extracted with water (2×) and saturated NaCl solution
  9. customby drying
  10. concentration(Na2SO4) and concentration in vacuo
  11. distillationThe residue was distilled under reduced pressure (70-75° C./0.5 mm Hg)

출처 및 근거

ORD 기록
ord-0e72e7f92da545aba7be70d63d21140a
출처 데이터셋
uspto-grants-2009_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07538105B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트