홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → alpha-Methylstyrene isopropenyltoluene

HRID 49747
인쇄

반응식

HRID 49747 반응식
[CH3:1][C:2]([C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][CH:5]=1)=[CH2:3].[C:10]([C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][C:14]=1[CH3:19])([CH3:12])=[CH2:11].C1(C)C=CC=CC=1>CC(C)=O>[CH3:3][C:2]([C:4]1[CH:9]=[CH:8][CH:7]=[CH:6][CH:5]=1)=[CH2:1].[C:10]([C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][C:14]=1[CH3:19])([CH3:12])=[CH2:11]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 1140TolueneHCID 7407Alpha-MethylstyreneHCID 81886O,alpha-dimethylstyrene

생성물 1

HCID 86585334alpha-Methylstyrene isopropenyltoluene

시약·촉매·용매 1

HCID 180Acetone용매

실험 절차

250 g α-methyl styrene (99.8% purity), 250 g isopropenyltoluene, and 500 g toluene were introduced into a three-mouthed flask, and mixed while boron trifluoride phenol complex was slowly added, and the material was then cooled under dry ice and acetone solvent and reacted for 3 hr at 20° C. Next, alkali was added to inactivate and remove the catalyst, and concentrated to remove the solvent and unreacted monomer, and α-methylstyrene-isopropenyltoluene copolymer was obtained as a residue. This polymer was designated Polymer B3, and its physical properties are listed in Table 2.

후처리

  1. additionmixed while boron trifluoride phenol complex
  2. additionwas slowly added
  3. temperaturethe material was then cooled under dry ice
  4. additionNext, alkali was added to inactivate and
  5. customremove the catalyst
  6. concentrationconcentrated
  7. customto remove the solvent and unreacted monomer

출처 및 근거

ORD 기록
ord-db5f8f3c860240cb9161dd66c55b5231
출처 데이터셋
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06709798B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트