3-Bromoanisole → N-cyclopropyl-3-methoxyaniline

HRID 499234노트

반응식

HRID 499234 반응식
Br[C:2]1[CH:3]=[C:4]([O:8][CH3:9])[CH:5]=[CH:6][CH:7]=1.[CH:10]1([NH2:13])[CH2:12][CH2:11]1.CC(C)([O-])C.[Na+].C1C=CC(P(C2C=CC3C(=CC=CC=3)C=2C2C3C(=CC=CC=3)C=CC=2P(C2C=CC=CC=2)C2C=CC=CC=2)C2C=CC=CC=2)=CC=1>C1(C)C=CC=CC=1.C1C=CC(/C=C/C(/C=C/C2C=CC=CC=2)=O)=CC=1.C1C=CC(/C=C/C(/C=C/C2C=CC=CC=2)=O)=CC=1.C1C=CC(/C=C/C(/C=C/C2C=CC=CC=2)=O)=CC=1.[Pd].[Pd]>[CH:10]1([NH:13][C:2]2[CH:7]=[CH:6][CH:5]=[C:4]([O:8][CH3:9])[CH:3]=2)[CH2:12][CH2:11]1

참가 물질

7

반응 조건

온도
80 °C

실험 절차

To a high-pressure tube was added 3-bromoanisole(0.250 mL, 2 mmol), cyclopropylamine (0.225 mL, 3.2 mmol), sodium t-butoxide (0.29 g, 3.0 mmol), (+/−) BINAP (0.04 g, 0.06 mmol), and Pd2(dba)3 (0.010 g, 0.01 mmol). This mixture was suspended in 4 mL anhydrous toluene. The tube was flushed with dry nitrogen gas, then capped and wrapped in aluminum foil. The reaction mixture was stirred and heated to 80° C. overnight, then allowed to cool, and the reaction vessel was opened. The mixture was diluted with diethyl ether, filtered through Celite, and the filtrate was concentrated to a yellow oil. LC/MS analysis showed one peak with the correct mass, and due to the limited stability of the material, it was carried through without further purification. FIA MS 164 (M+1).

후처리

  1. customThe tube was flushed with dry nitrogen gas
  2. customcapped
  3. temperatureto cool
  4. additionThe mixture was diluted with diethyl ether
  5. filtrationfiltered through Celite
  6. concentrationthe filtrate was concentrated to a yellow oil
  7. customdue to the limited stability of the material, it was carried through without further purification

출처 및 근거

ORD 기록
ord-6bd01bec80b34901b245ad4efea01bd4
출처 데이터셋
uspto-grants-2010_08
특허 번호
US07767680B2

반응 노트

불러오는 중…