홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diisopropylethylamine → 4-[1-Methyl-2-(4-(trifluoromethyl)phenylamino)-1H-benzoimidazol-5-yloxy]-pyridine-2-carbonitrile

HRID 499990
인쇄

반응식

HRID 499990 반응식
[F:1][C:2]([F:13])([F:12])[C:3]1[CH:8]=[CH:7][C:6]([N:9]=[C:10]=S)=[CH:5][CH:4]=1.[CH3:14][NH:15][C:16]1[CH:30]=[CH:29][C:19]([O:20][C:21]2[CH:26]=[CH:25][N:24]=[C:23]([C:27]#[N:28])[CH:22]=2)=[CH:18][C:17]=1[NH2:31].CCN(C(C)C)C(C)C.[Cl-].ClC1N(C)CC[NH+]1C>CC#N.O>[CH3:14][N:15]1[C:16]2[CH:30]=[CH:29][C:19]([O:20][C:21]3[CH:26]=[CH:25][N:24]=[C:23]([C:27]#[N:28])[CH:22]=3)=[CH:18][C:17]=2[N:31]=[C:10]1[NH:9][C:6]1[CH:7]=[CH:8][C:3]([C:2]([F:13])([F:12])[F:1])=[CH:4][CH:5]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 81531DiisopropylethylamineHCID 1371344-(Trifluoromethyl)phenyl isothiocyanateHCID 109867151H-Imidazolium, 2-chloro-4,5-dihydro-1,3-dimethyl-, chlorideHCID 210372914-(4-Methylamino-3-amino-phenoxy)-pyridine-2-carbonitrile

생성물 1

HCID 441388984-[1-Methyl-2-(4-(trifluoromethyl)phenylamino)-1H-benzoimidazol-5-yloxy]-pyridine-2-carbonitrile
수율 82.8%

시약·촉매·용매 2

HCID 962Water용매HCID 6342Acetonitrile용매

반응 조건

온도
50 °C

실험 절차

4-(Trifluoromethyl)phenyl isothiocyanate (9.65 g, 0.0475 moles) was added to a solution of 4-(4-methylamino-3-amino-phenoxy)-pyridine-2-carbonitrile (12.0 g, 0.05 moles) in MeCN (60 mL). HPLC analysis indicated complete conversion of the amine after 40 min. The mixture was filtered and the removed solids washed with MeCN (2×12 mL). DIPEA (17.5 mL, 0.1 moles) was added to the filtrate. 2-Chloro-1,3-dimethylimidazolinium chloride (DMC) was added in 4×2.11-g portions (8.44 g, 0.05 moles) every 10 min. After the final addition, the mixture was allowed to stir an additional 10 min when HPLC analysis indicated complete conversion. The mixture was then heated to 50° C. (internal temperature). After 45 min at 50° C., HPLC analysis indicated complete conversion to the product. The mixture was allowed to cool to ambient temperature and then H2O (45 mL) was added. The reaction mixture was initially homogeneous before compound began to precipitate from the mixture. After stirring for 2 h, the solid was collected by filtration and washed with 2:1 MeCN/H2O (2×20 mL). The crude product was dried in a vacuum oven at 50° C. for 16 h to afford 16.10 g (78%) of the title compound 1H NMR (400 MHz, DMSO-d6) δ 9.5 (m, 1H), 8.5 (m, 1H), 8.0 (m, 2H), 7.7 (m, 2H), 7.6 (m, 1H), 7.4 (m, 1H), 7.3 (m, 1H), 7.1 (m, 1H), 6.9 (m, 1H), 3.7 (m, 3H); APCI MS [M+H]+=410; HPLC>99% (LCAP).

후처리

  1. customafter 40 min
  2. filtrationThe mixture was filtered
  3. washthe removed solids washed with MeCN (2×12 mL)
  4. additionAfter the final addition
  5. waitAfter 45 min at 50° C.
  6. temperatureto cool to ambient temperature
  7. customto precipitate from the mixture
  8. stirringAfter stirring for 2 h
  9. filtrationthe solid was collected by filtration
  10. washwashed with 2:1 MeCN/H2O (2×20 mL)
  11. dry with materialThe crude product was dried in a vacuum oven at 50° C. for 16 h

출처 및 근거

ORD 기록
ord-f9d317bda707471fb3a10bfc944fce17
출처 데이터셋
uspto-grants-2010_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07767820B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트