홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanesulfonic Acid → 2-Chloro-3-(2,2,2-trifluoroethoxy)pyridine

HRID 50131
인쇄

반응식

HRID 50131 반응식
N[C:2]1[C:3]([Cl:8])=[N:4][CH:5]=[CH:6][CH:7]=1.[F:9][C:10]([F:14])([F:13])[CH2:11][OH:12].CS(O)(=O)=O.C(ON=O)(C)(C)C.[OH-].[Na+]>C(O)CO>[Cl:8][C:3]1[C:2]([O:12][CH2:11][C:10]([F:14])([F:13])[F:9])=[CH:7][CH:6]=[CH:5][N:4]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 6395Methanesulfonic AcidHCID 64092,2,2-TrifluoroethanolHCID 10906Tert-Butyl nitriteHCID 14798Sodium HydroxideHCID 805282-Chloro-3-pyridylamine

생성물 1

HCID 120567282-Chloro-3-(2,2,2-trifluoroethoxy)pyridine수율 65.8%

시약·촉매·용매 1

HCID 174Ethylene Glycol용매

실험 절차

A reactor vessel is charged with 3-amino-2-chloropyridine (15.0 g, 117 mmol), 2,2,2-trifluoroethanol (21 g, 210 mmol), and methanesulfonic acid (11.2 g, 117 mmol). The solution is heated to the range 50° C. to 60° C. and then t-butylnitrite (14.7 g of a 90% solution, 128 mmol) is added drop-wise to the vessel while maintaining the temperature at 50° C. to 60° C. After nitrogen evolution ceases, the solution is cooled and ethylene glycol is charged to the reactor. The vessel is put under vacuum and the solvent and other volatiles are distilled off. The reaction mass is then neutralized with aqueous saturated sodium bicarbonate solution and extracted with MTBE. The solvent is removed to leave an oil which is stirred several hours with 10% aqueous NaOH (23 g) followed by extraction with MTBE. MTBE is removed under vacuum to obtain 2-chloro-3-(2,2,2-trifluoroethoxy)pyridine as a crude oil (16.83 g) with an actual yield of 65.8%. Analysis by GC indicates the purity of the 2-chloro-3-(2,2,2-trifluoroethoxy)pyridine to be 91.4%. Recovery of the 2,2,2-trifluoroethanol solvent is 88.9% by weight.

후처리

  1. temperatureThe solution is heated to the range 50° C. to 60° C.
  2. temperaturewhile maintaining the temperature at 50° C. to 60° C
  3. temperatureAfter nitrogen evolution ceases, the solution is cooled
  4. distillationthe solvent and other volatiles are distilled off
  5. extractionextracted with MTBE
  6. customThe solvent is removed
  7. customto leave an oil which
  8. extractionfollowed by extraction with MTBE
  9. customMTBE is removed under vacuum

출처 및 근거

ORD 기록
ord-f1e7fd406551486a976ac70ebb6754c1
출처 데이터셋
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06710180B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트