홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

3-Mercaptopropionic Acid → Poly(difluoromethylene), alpha-(2-((2-carboxyethyl)thio)ethyl)-omega-fluoro-

HRID 515008
인쇄

반응식

HRID 515008 반응식
[SH:1][CH2:2][CH2:3][C:4]([OH:6])=[O:5].[F:7][C:8]([F:12])([F:11])[CH:9]=[CH2:10]>N(C(C)(C)C#N)=NC(C)(C)C#N.C(C1C=CC=CC=1)(=O)CCCCCCC.C1(C)C=CC=CC=1>[F:7][C:8]([F:12])([F:11])[CH2:9][CH2:10][S:1][CH2:2][CH2:3][C:4]([OH:6])=[O:5]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 2

HCID 65143-Mercaptopropionic AcidHCID 126723,3,3-Trifluoropropene

생성물 1

HCID 171658Poly(difluoromethylene), alpha-(2-((2-carboxyethyl)thio)ethyl)-omega-fluoro-수율 83%

시약·촉매·용매 3

HCID 6547Azobisisobutyronitrile촉매HCID 74291Octanophenone촉매
HCID 1140
Toluene
용매

반응 조건

온도
60 °C

실험 절차

A 100 mL stainless steel Parr reactor was charged with azobisisobutyronitrile (AIBN, 0.231 g, 1.41 mmol), toluene (45 mL), 3-mercaptopropionic acid (3.40 g, 32.0 mmol), and octanophenone (526.2 mg) as an internal standard, and was purged and pressure checked with nitrogen (N2). The reactor was cooled with dry ice and the 3,3,3-trifluoropropene (3.1 g, 32.3 mmol) was condensed into the reactor. The ice bath was removed and the reactor heated to 60° C. and stirred for 27 hours. The internal yield of the reaction was determined to be 80% by use of the octanophenone internal standard. The pressure was released and the crude mixture removed from the reactor. The mixture was concentrated by rotary evaporation and 50 mL of 10% sodium hydroxide was added. The solution was washed with methyl tert-butylether (50 mL) then acidified to pH ˜1 with 6 N hydrochloric acid. The product was extracted with 100 mL methyl tert-butylether, dried over magnesium sulfate (MgSO4), filtered, and concentrated to give the crude titled compound as an oil (5.34 g, 26.4 mmol, 83%): 1H NMR (400 MHz, CDCl3) δ 2.83 (td, J=7.1, 0.9 Hz, 2H), 2.76-2.64 (m, 4H), 2.47-2.30 (m, 2H); 13C NMR (101 MHz, CDCl3) δ 177.68, 125.91 (q, J=277.1 Hz), 34.58 (q, J=28.8 Hz), 34.39, 26.63, 24.09 (q, J=3.3 Hz); 19F NMR (376 MHz, CDCl3) δ −66.49.

후처리

  1. customwas purged
  2. temperatureThe reactor was cooled with dry ice
  3. customcondensed into the reactor
  4. customThe ice bath was removed
  5. customthe crude mixture removed from the reactor
  6. concentrationThe mixture was concentrated by rotary evaporation and 50 mL of 10% sodium hydroxide
  7. additionwas added
  8. washThe solution was washed with methyl tert-butylether (50 mL)
  9. extractionThe product was extracted with 100 mL methyl tert-butylether
  10. dry with materialdried over magnesium sulfate (MgSO4)
  11. filtrationfiltered
  12. concentrationconcentrated

출처 및 근거

ORD 기록
ord-313e22d9ed1e49d0988037b047605876
출처 데이터셋
uspto-grants-2015_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09108946B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트