홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

3-Chloro-1,2-propanediol → Propylene glycol lauryldimonium chloride

HRID 522248
인쇄

반응식

HRID 522248 반응식
[CH3:1][N:2]([CH3:15])[CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH3:14].[Cl:16][CH2:17][CH:18]([OH:21])[CH2:19][OH:20]>>[Cl-:16].[OH:21][CH:18]([CH2:19][OH:20])[CH2:17][N+:2]([CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH3:14])([CH3:1])[CH3:15]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 72903-Chloro-1,2-propanediolHCID 8168Lauryldimethylamine

생성물 1

HCID 20350199Propylene glycol lauryldimonium chloride

반응 조건

온도
30 °C

실험 절차

In a 2 L reactor system 638.06 g of dimethyldodecyl amine (97.6%, 2.92 moles) is added to 603.91 g distilled water. The solution is heated to 30° C. and 21.21 g sodium hydroxide (50%) is added. Over 30 minutes 353.49 g 3-chloro-1,2-dihydroxypropane (99.3%, 3.18 moles) is added while the reaction solution is being mixed with a mechanical stirrer. The reaction solution is mixed at 30° C. for 90 minutes and then the temperature is gradually increased to 40° C. over 45 minutes. The temperature is then increased over the next hour to 55° C. The solution turned from a semi-opaque white to clear. The solution is held at 55° C. for two hours; after one hour the solution is getting more viscous so 135.48 g distilled water is added. The solution is allowed to cool to room temperature and stirred overnight. The solution had become too viscous for the stirrer to operate so 150.59 g distilled water is added and the temperature is increased to 45° C. The solution is allowed to cool to room temperature and 46.59 g trimethylamine (43.6%) is added and mixed for two hours. The solution is allowed to stand without mixing or heating for 60 hours. The solution is then heated to 40° C. and the pH is adjusted to 10 and purged with nitrogen until the residual trimethylamine hydrochloride is less than 20 ppm. The pH is then decreased to 6.5 with concentrated hydrochloric acid. The isolated product has the following structure:

후처리

  1. distillationdistilled water
  2. addition21.21 g sodium hydroxide (50%) is added
  3. additionis being mixed with a mechanical stirrer
  4. additionThe reaction solution is mixed at 30° C. for 90 minutes
  5. temperaturethe temperature is gradually increased to 40° C. over 45 minutes
  6. temperatureThe temperature is then increased over the next hour to 55° C
  7. waitafter one hour the solution is getting more viscous so 135.48 g
  8. distillationdistilled water
  9. additionis added
  10. temperatureto cool to room temperature
  11. distillationdistilled water
  12. additionis added
  13. temperaturethe temperature is increased to 45° C
  14. temperatureto cool to room temperature
  15. addition46.59 g trimethylamine (43.6%) is added
  16. additionmixed for two hours
  17. additionwithout mixing
  18. temperatureheating for 60 hours
  19. temperatureThe solution is then heated to 40° C.
  20. custompurged with nitrogen until the residual trimethylamine hydrochloride

출처 및 근거

ORD 기록
ord-84a3b5d3962c4a66bb271adfe1f30d57
출처 데이터셋
uspto-grants-2016_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09328279B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트