Sodium Hydroxide → O,O'-Dde

HRID 5224

반응식

HRID 5224 반응식
[Cl:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][C:3]=1[CH:8]([C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][C:14]=1[Cl:19])[C:9](Cl)([Cl:11])[Cl:10].[OH-].[Na+].[Cl-].CC(C)CCCCCCCCCCC[NH2+]CC1C=CC=CC=1>>[Cl:1][C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][C:3]=1[C:8]([C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][C:14]=1[Cl:19])=[C:9]([Cl:10])[Cl:11]

참가 물질

4

반응 조건

온도
93 °C

실험 절차

150 g of solid 1,1-bis(chlorophenyl)-2,2,2-trichloroethane were added to 248.8 g of a 27.2% strength aqueous sodium hydroxide solution maintained at 93° C. 1.4 g of dimethyllaurylbenzylammonium chloride were added thereto. The temperature increased from 93° to 103° C. The addition of solid 1,1-bis(chlorophenyl)-2,2,2-trichloroethane was continued up to a total amount of 300 g. 1.1 g of dimethyllaurylbenzylammonium chloride were added again and the temperature was maintained between 100° and 105° C. for 14 hours, 30 min. The organic phase was separated off by phase separation and washed three times with 100 g of a 1N solution of sulfuric acid and with water (100 g). 263.7 g of 1,1-bis(chlorophenyl)-2,2-dichloroethylene were obtained (y=98.0%) with 0.09% of 1,1-bis(chlorophenyl)-2,2,2-trichloroethane.

후처리

  1. temperatureThe temperature increased from 93° to 103° C
  2. temperaturethe temperature was maintained between 100° and 105° C. for 14 hours, 30 min
  3. customThe organic phase was separated off by phase separation
  4. washwashed three times with 100 g of a 1N solution of sulfuric acid

출처 및 근거

ORD 기록
ord-14dbf4ab6e104d8e99acc3f339bbd870
출처 데이터셋
uspto-grants-1993_09
특허 번호
US05243110

연결된 노트

불러오는 중…