홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → Cyclopropyl phenyl sulfide

HRID 524385
인쇄

반응식

HRID 524385 반응식
[CH3:1][C:2]([CH3:5])([O-])C.[K+].[C:7]1([SH:13])[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1.BrC1CC1.O>CS(C)=O>[CH:5]1([S:13][C:7]2[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=2)[CH2:2][CH2:1]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 962Water2회HCID 7969ThiophenolHCID 78037BromocyclopropaneHCID 23665647Potassium tert-butoxide

생성물 1

HCID 123348Cyclopropyl phenyl sulfide

시약·촉매·용매 1

HCID 679Dimethyl Sulfoxide용매

반응 조건

온도
22.5 °C

실험 절차

To a stirred suspension of potassium tert-butoxide (52.4 g, 467 mmol) in DMSO (200 mL) was added thiophenol (42.9 g, 389 mmol) at 0° C. and stirred for 30 minutes at 20-25° C., followed by addition of bromocyclopropane (37.3 mL, 467 mmol). The reaction mixture was heated to 60° C. and continued to stir for 24 hours at the same temperature (with cold water circulation in the condenser). Reaction monitoring was done by TLC showed completion of reaction. The reaction mixture was then cooled to 20-25° C., added water (800 mL) then extracted with diethyl ether (3×400 mL). Diethyl ether layer was washed with water (500 mL) then with brine (150 mL) and dried over anhydrous sodium sulfate (75 g). Sodium sulfate was filtered and wash with diethyl ether (50 mL), solvent was removed under reduced pressure using rotavapour (bath temperature 30-35° C.) to get the required oily product which was dried under vacuum for 30 minutes. The crude material was used for the next step with out any purification.

후처리

  1. temperatureThe reaction mixture was heated to 60° C.
  2. customReaction monitoring
  3. customcompletion of reaction
  4. temperatureThe reaction mixture was then cooled to 20-25° C.
  5. extractionthen extracted with diethyl ether (3×400 mL)
  6. washDiethyl ether layer was washed with water (500 mL)
  7. dry with materialwith brine (150 mL) and dried over anhydrous sodium sulfate (75 g)
  8. filtrationSodium sulfate was filtered
  9. washwash with diethyl ether (50 mL), solvent
  10. customwas removed under reduced pressure
  11. customrotavapour (bath temperature 30-35° C.)
  12. customto get the required oily product which
  13. customwas dried under vacuum for 30 minutes
  14. customThe crude material was used for the next step with out any purification

출처 및 근거

ORD 기록
ord-369ba6d02ce44166ae0e3224340f7771
출처 데이터셋
uspto-grants-2016_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09340506B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트