[Cl:1][C:2]1[N:7]=[CH:6][C:5]([NH2:8])=[CH:4][CH:3]=1.Cl.[NH2:10][C@:11]([CH3:17])([CH2:15][CH3:16])[C:12](O)=[O:13].C(P1(=O)OP(CCC)(=O)OP(CCC)(=O)O1)CC.CCN(CC)CC.Cl[C:44](Cl)([O:46]C(=O)OC(Cl)(Cl)Cl)Cl>CC#N.C(OCC)(=O)C.C(OCC)(=O)C>[Cl:1][C:2]1[N:7]=[CH:6][C:5]([N:8]2[C:12](=[O:13])[C@:11]([CH2:15][CH3:16])([CH3:17])[NH:10][C:44]2=[O:46])=[CH:4][CH:3]=16-Chloropyridin-3-amine (3.0 g, 23.3 mmol) was dissolved in a 3:1 v/v mixture of CH3CN/ethyl acetate (20 mL) and (2R)-2-amino-2-methylbutanoic acid hydrochloride (3.97 g, 25.63 mmol) was added, followed by a 50% w/w solution in ethyl acetate of T3P (15.3 mL, 25.63). The mixture was heated to 60° C. for 2 hrs, then quenched with NaOH 3N while the pH was ˜10 and then diluted with ethyl acetate (100 mL). The organic phase was collected, dried over Na2SO4 and concentrated under vacuum to a final volume of ˜15 mL. The solution was cooled down to 0-5° C. and Et3N (11.4 ml, 81.9 mmol) was added. A solution of triphosgene (2.76 g, 6.96 mmol) in 10 mL of ethyl acetate was added drop wise in 15 min, keeping the internal temperature below 5° C. The mixture was stirred at 5° C. for 30 minutes then quenched with water (100 mL) and finally diluted with additional ethyl acetate (100 mL). Two phases were separated and the organic layer was washed with water and brine, dried over Na2SO4 and concentrated under vacuum. The crude product was suspended in 15 mL of ethyl acetate followed by the drop wise addition of 65 mL of n-heptane. The resulting suspension was stirred at room temperature for 2 hrs, filtered, and the cake washed with a 2:8 v/v mixture of ethyl acetate/n-heptane (2×10 mL) before being dried at 40° C. for 18 hrs affording the title compound (3.5 g) as white solid.
불러오는 중…