홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium hydride → 2-(8-fluoro-2H-benzo[b][1,4]oxazin-4(3H)-yl)-5-(trifluoromethyl)benzonitrile

HRID 528606
인쇄

반응식

HRID 528606 반응식
[F:1][C:2]1[C:7]2[O:8][CH2:9][CH2:10][NH:11][C:6]=2[CH:5]=[CH:4][CH:3]=1.[H-].[Na+].F[C:15]1[CH:22]=[CH:21][C:20]([C:23]([F:26])([F:25])[F:24])=[CH:19][C:16]=1[C:17]#[N:18]>C1COCC1>[F:1][C:2]1[C:7]2[O:8][CH2:9][CH2:10][N:11]([C:15]3[CH:22]=[CH:21][C:20]([C:23]([F:24])([F:26])[F:25])=[CH:19][C:16]=3[C:17]#[N:18])[C:6]=2[CH:5]=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24758Sodium hydrideHCID 5210162-Fluoro-5-(trifluoromethyl)benzonitrileHCID 162444518-Fluoro-3,4-dihydro-2H-1,4-benzoxazine

생성물 1

HCID 897620162-(8-fluoro-2H-benzo[b][1,4]oxazin-4(3H)-yl)-5-(trifluoromethyl)benzonitrile수율 33.7%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
0 °C

실험 절차

To a flask charged with 8-fluoro-3,4-dihydro-2H-benzo[b][1,4]oxazine (AAT Pharmaceuticals) (0.237 g, 1.547 mmol) was added THF (6.19 ml). The solution was cooled in an ice water bath prior to the addition of sodium hydride (60% in mineral oil) (0.068 g, 1.702 mmol). The resulting suspension was stirred for 30 min at 0° C., the 30 min at rt. The resulting pale yellow suspension was cooled in an ice water bath prior to the addition of 2-fluoro-5-(trifluoromethyl)benzonitrile (0.322 g, 1.702 mmol). The resulting mixture was stirred for 30 min at 0° C., then 1 hr at room temperature. The mixture was heated to 60° C. overnight then at reflux for 2 hr. The mixture was cooled to room temperature and added carefully to ice water and extracted with EtOAc (2×). The combined organics were dried with Na2SO4, filtered and dried under reduced pressure. The crude material was purified with a 25 g SNAP column ramping EtOAc in heptane (0-25%, 10% DCM throughout) yielding product, obtained as a yellow oil, 2-(8-fluoro-2H-benzo[b][1,4]oxazin-4(3 H)-yl)-5-(trifluoromethyl)benzonitrile (0.168 g, 0.521 mmol, 33.7% yield). 1H NMR (400 MHz, CHLOROFORM-d) δ ppm 3.89-3.97 (m, 2 H) 4.36 (dd, J=4.94, 3.86 Hz, 2 H) 6.61 (dt, J=7.78, 1.79 Hz, 1 H) 6.70-6.80 (m, 2 H) 7.50 (d, J=8.80 Hz, 1 H) 7.71-7.77 (m, 1 H) 7.92-7.95 (m, 1 H). m/z (ESI) 323.1 (M+H)+.

후처리

  1. temperatureThe solution was cooled in an ice water bath
  2. customthe 30 min
  3. customat rt
  4. temperatureThe resulting pale yellow suspension was cooled in an ice water bath
  5. stirringThe resulting mixture was stirred for 30 min at 0° C.
  6. custom1 hr
  7. customat room temperature
  8. temperatureThe mixture was heated to 60° C. overnight
  9. temperatureat reflux for 2 hr
  10. temperatureThe mixture was cooled to room temperature
  11. extractionextracted with EtOAc (2×)
  12. dry with materialThe combined organics were dried with Na2SO4
  13. filtrationfiltered
  14. customdried under reduced pressure
  15. customThe crude material was purified with a 25 g SNAP column
  16. customyielding product

출처 및 근거

ORD 기록
ord-4ccbe79ac33d47ee989385f254bc197d
출처 데이터셋
uspto-grants-2016_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09346798B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트