홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Potassium Carbonate → 9-Phenylanthracene

HRID 535234
인쇄

반응식

HRID 535234 반응식
Br[C:2]1[C:3]2[C:8]([CH:9]=[C:10]3[C:15]=1[CH:14]=[CH:13][CH:12]=[CH:11]3)=[CH:7][CH:6]=[CH:5][CH:4]=2.[C:16]1(B(O)O)[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1.C1(C)C=CC=CC=1P(C1C=CC=CC=1C)C1C=CC=CC=1C.C(=O)([O-])[O-].[K+].[K+]>C([O-])(=O)C.[Pd+2].C([O-])(=O)C.O.COCCOC>[C:16]1([C:2]2[C:3]3[C:8]([CH:9]=[C:10]4[C:15]=2[CH:14]=[CH:13][CH:12]=[CH:11]4)=[CH:7][CH:6]=[CH:5][CH:4]=3)[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 11430Potassium CarbonateHCID 66827Phenylboronic AcidHCID 740629-BromoanthraceneHCID 80271Tri-o-tolylphosphine

생성물 1

HCID 117669-Phenylanthracene

시약·촉매·용매 3

HCID 167845palladium(II) acetate촉매
HCID 962
Water
용매
HCID 80711,2-Dimethoxyethane용매

실험 절차

In a 200 mL three-neck flask, 6.4 g (25 mmol) of 9-bromoanthracene, 3.0 g (25 mmol) of phenylboronic acid, 0.76 g (2.5 mmol) of tri(ortho-tolyl)phosphine, 60 mL of ethylene glycol dimethyl ether (DME), and 25 mL of a 2.0 M potassium carbonate solution were placed. The mixture was degassed by being stirred under reduced pressure, and the air in the flask was replaced with nitrogen. To the mixture, 0.11 g (0.50 mmol) of palladium(II) acetate was added and stirred under nitrogen stream at 80° C. for 3 hours. After a certain period, water was added to the mixture, and an aqueous layer was extracted with toluene. The obtained extracted solution and the organic layer were combined and washed with saturated saline, and the organic layer was dried with magnesium sulfate. The mixture was subjected to suction filtration through Celite (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 531-16855), Florisil (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 540-00135), and alumina, and the filtrate was condensed to give a solid. The solid was recrystallized with toluene/methonol, so that 5.8 g of target white powder was obtained in a yield of 92%.

후처리

  1. customThe mixture was degassed
  2. stirringstirred under nitrogen stream at 80° C. for 3 hours
  3. waitAfter a certain period
  4. extractionan aqueous layer was extracted with toluene
  5. extractionThe obtained extracted solution
  6. washwashed with saturated saline
  7. dry with materialthe organic layer was dried with magnesium sulfate
  8. filtrationThe mixture was subjected to suction filtration through Celite (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 531-16855), Florisil (produced by Wako Pure Chemical Industries, Ltd., Catalog No. 540-00135), and alumina
  9. customcondensed
  10. customto give a solid
  11. customThe solid was recrystallized with toluene/methonol, so that 5.8 g of target white powder
  12. customwas obtained in a yield of 92%

출처 및 근거

ORD 기록
ord-6f04b398be644656aa03265da7b39083
출처 데이터셋
uspto-grants-2014_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08859108B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트