홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Iodine → Disulfide, bis(4-methylphenyl)

HRID 542276
인쇄

반응식

HRID 542276 반응식
[C:1]1([CH3:11])[CH:6]=[CH:5][C:4]([S:7](Cl)(=O)=O)=[CH:3][CH:2]=1.[I-].[Na+].[I-].S(=O)(O)[O-].[Na+].II.[OH-].[Na+]>C(O)(=O)C.O>[C:1]1([CH3:11])[CH:6]=[CH:5][C:4]([S:7][S:7][C:4]2[CH:5]=[CH:6][C:1]([CH3:11])=[CH:2][CH:3]=2)=[CH:3][CH:2]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 6

HCID 807Iodine2회HCID 5238Sodium IodideHCID 73974-Toluenesulfonyl chlorideHCID 14798Sodium HydroxideHCID 30165Iodide IonHCID 23665763Sodium Bisulfite

생성물 1

HCID 66027Disulfide, bis(4-methylphenyl)
수율 97%

시약·촉매·용매 2

HCID 176Acetic Acid용매HCID 962Water용매

반응 조건

온도
60 °C

실험 절차

19 g (0.1 mole) of p-toluene sulfonyl chloride are dissolved in 100 ml acetic acid whereupon 1.5 g (0.01 mole) of sodium iodide are added and the reaction mixture is stirred until the iodide is completely dissolved (5 minutes). The reaction mixture becomes dark brown. A 30% sodium bisulfite solution is slowly added dropwise at a rate that on addition the iodine color of the mixture should just disappear. During the dropwise addition the temperature of the mixture is raised to 60° C. (within about 30 minutes). The reaction is continued at this temperature until the color of iodine does not appear any more. At the end of the reaction the reaction mixture is diluted with 50 ml of water and the pH is adjusted to the value of 4 by adding a 20% sodium hydroxide solution. The reaction mixture is extracted three times with 80 ml of n-hexane each, the hexane phases are combined, dried over anhydrous sodium sulfate and evaporated under atmospheric pressure. From the distillation residue the traces of solvent are removed at 70° C. in vacuo and the product is crystallized at 20° C. Thus 11.9 g of p-tolyl-disulfide are obtained, yield 97%. Mp.: 43°-45° C.

후처리

  1. additionare added
  2. dissolutionis completely dissolved (5 minutes)
  3. additionDuring the dropwise addition the temperature of the mixture
  4. customAt the end of the reaction the reaction mixture
  5. extractionThe reaction mixture is extracted three times with 80 ml of n-hexane each, the hexane phases
  6. dry with materialdried over anhydrous sodium sulfate
  7. customevaporated under atmospheric pressure
  8. customFrom the distillation residue the traces of solvent are removed at 70° C. in vacuo
  9. customthe product is crystallized at 20° C

출처 및 근거

ORD 기록
ord-9f38a00b06c24f159bc8e96dc395e54e
출처 데이터셋
uspto-grants-1987_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04656290

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트