홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Formaldehyde → N-methyl-1-azabicyclo[2.2.2]octan-3-amine

HRID 542442
인쇄

반응식

HRID 542442 반응식
[CH2:1]([NH:8][CH:9]1[CH:14]2[CH2:15][CH2:16][N:11]([CH2:12][CH2:13]2)[CH2:10]1)C1C=CC=CC=1.C=O.C([BH3-])#N.[Na+]>O>[CH3:1][NH:8][CH:9]1[CH:14]2[CH2:15][CH2:16][N:11]([CH2:12][CH2:13]2)[CH2:10]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 712FormaldehydeHCID 2615513-(Benzylamino)quinuclidineHCID 5003444Sodium cyanoborohydride

생성물 1

HCID 19775384N-methyl-1-azabicyclo[2.2.2]octan-3-amine

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
5 °C

실험 절차

To a solution of 73.7 g of 3-benzylamino quinuclidine in water (≃300 to 400 ml) are added, while cooling to 5° C., 51 ml of a 40% aqueous formaldehyde solution. Then after the addition, the mixture is left for 30 minutes at 5° C., then 32 g of sodium cyanoborohydride are added within 1 to 2 hours. Then it is left at room temperature for 12 hours, extracted with ethyl acetate, the mixture obtained is dried on sodium (or magnesium) sulfate, filtered, the filtrate is evaporated and the residue is distilled (Boiling point [0.04 mm/Hg]=125° C.). Thus the expected product is obtained practically quantitatively.

후처리

  1. additionThen after the addition
  2. waitThen it is left at room temperature for 12 hours
  3. extractionextracted with ethyl acetate
  4. customthe mixture obtained
  5. dry with materialis dried on sodium (or magnesium) sulfate
  6. filtrationfiltered
  7. customthe filtrate is evaporated
  8. distillationthe residue is distilled (Boiling point [0.04 mm/Hg]=125° C.)

출처 및 근거

ORD 기록
ord-d303726616f1422d9252d5a2a46172e2
출처 데이터셋
uspto-grants-1987_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04657911

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트