홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Chloride → 3-(2-Chloro-6,7-dimethoxyquinazolin-4-yl)phenylamine

HRID 547492
인쇄

반응식

HRID 547492 반응식
C(=O)([O-])[O-].[Na+].[Na+].O.[NH2:8][C:9]1[CH:10]=[C:11](B(O)O)[CH:12]=[CH:13][CH:14]=1.[Cl:18][C:19]1[N:28]=[C:27](Cl)[C:26]2[C:21](=[CH:22][C:23]([O:32][CH3:33])=[C:24]([O:30][CH3:31])[CH:25]=2)[N:20]=1.[Cl-].[Na+]>O1CCCC1.Cl[Pd]Cl.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.O>[Cl:18][C:19]1[N:28]=[C:27]([C:13]2[CH:14]=[C:9]([NH2:8])[CH:10]=[CH:11][CH:12]=2)[C:26]2[C:21](=[CH:22][C:23]([O:32][CH3:33])=[C:24]([O:30][CH3:31])[CH:25]=2)[N:20]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 4

HCID 5234Sodium ChlorideHCID 10340Sodium CarbonateHCID 5203272,4-Dichloro-6,7-dimethoxyquinazolineHCID 143894233-Aminophenylboronic acid monohydrate

생성물 1

HCID 576095393-(2-Chloro-6,7-dimethoxyquinazolin-4-yl)phenylamine수율 99.7%

시약·촉매·용매 4

HCID 11776
Triphenylphosphine
촉매
HCID 24290Palladium Chloride촉매
HCID 962Water용매
HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
25 °C

실험 절차

To 634 g of sodium carbonate (5.98 mol) was added 2.91 kg of water under a nitrogen atmosphere, followed by stirring for dissolution. To the solution were added 3.0 L of tetrahydrofuran, 431 g of 3-aminophenyl boronic acid monohydrate (2.78 mol), 30.4 g of triphenylphosphine (0.116 mol) and 26.0 g of dichloropalladium (0.116 mol) in this order. To the mixture was dropwise added a solution of 2,4-dichloro-6,7-dimethoxyquinazoline (600 g; 2.32 mol) in tetrahydrofuran (12.0 L) over 2 hours while stirring at 60° C., followed by stirring at the same temperature for 16 hours. To the mixture were added 3.0 kg of a 5% sodium chloride solution and 12.0 L of tetrahydrofuran in this order, and the mixture was stirred at 50° C. for 1 hour and allowed to cool down to 25° C. The mixture was filtered through celite to remove the insoluble matter, and the filtrate was transferred to separatory funnel and the organic layer was separated. To the separated organic layer were added 150 g of anhydrous magnesium sulfate and 60.0 g of activated carbon, and the mixture was stirred at 50° C. for 1 hour and allowed to cool down to 25° C. The mixture was filtered through celite to remove the insoluble matter, and the filtrate was concentrated under reduced pressure. To the residue was added 6.0 L of water, and the mixture was stirred at room temperature for 1 hour, and precipitated crystals were collected by filtration. The collected crystals were dried at 50° C. under reduced pressure to yield 730 g of a product of interest. Yield: 62.1%

후처리

  1. stirringwhile stirring at 60° C.
  2. stirringby stirring at the same temperature for 16 hours
  3. stirringthe mixture was stirred at 50° C. for 1 hour
  4. filtrationThe mixture was filtered through celite
  5. customto remove the insoluble matter
  6. customthe filtrate was transferred to separatory funnel
  7. customthe organic layer was separated
  8. additionTo the separated organic layer were added 150 g of anhydrous magnesium sulfate and 60.0 g of activated carbon
  9. stirringthe mixture was stirred at 50° C. for 1 hour
  10. temperatureto cool down to 25° C
  11. filtrationThe mixture was filtered through celite
  12. customto remove the insoluble matter
  13. concentrationthe filtrate was concentrated under reduced pressure
  14. additionTo the residue was added 6.0 L of water
  15. stirringthe mixture was stirred at room temperature for 1 hour
  16. customprecipitated crystals
  17. filtrationwere collected by filtration
  18. customThe collected crystals were dried at 50° C. under reduced pressure

출처 및 근거

ORD 기록
ord-837d432d853c4f0d9ecd42573c3b6b5d
출처 데이터셋
uspto-grants-2011_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07939540B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트