홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanol → 4-(2-Amino-2-oxoethoxy)-5-(2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl)-2-methoxybenzoic acid

HRID 555138
인쇄

반응식

HRID 555138 반응식
[NH2:1][C:2](=[O:37])[CH2:3][O:4][C:5]1[C:14]([C:15]2[CH:16]=[CH:17][C:18]3[O:22][C:21]([C:23]4[CH:28]=[CH:27][C:26]([F:29])=[CH:25][CH:24]=4)=[C:20]([C:30](=[O:33])[NH:31][CH3:32])[C:19]=3[CH:34]=2)=[CH:13][C:8]([C:9]([O:11]C)=[O:10])=[C:7]([O:35][CH3:36])[CH:6]=1.CO.[OH-].[Na+]>C1COCC1>[NH2:1][C:2](=[O:37])[CH2:3][O:4][C:5]1[C:14]([C:15]2[CH:16]=[CH:17][C:18]3[O:22][C:21]([C:23]4[CH:24]=[CH:25][C:26]([F:29])=[CH:27][CH:28]=4)=[C:20]([C:30](=[O:33])[NH:31][CH3:32])[C:19]=3[CH:34]=2)=[CH:13][C:8]([C:9]([OH:11])=[O:10])=[C:7]([O:35][CH3:36])[CH:6]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 887MethanolHCID 14798Sodium HydroxideHCID 59275516Methyl 4-(2-amino-2-oxoethoxy)-5-(2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl)-2-methoxybenzoate

생성물 1

HCID 666060174-(2-Amino-2-oxoethoxy)-5-(2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl)-2-methoxybenzoic acid수율 60%

시약·촉매·용매 1

HCID 8028
Tetrahydrofuran
용매

실험 절차

To a 50 mL round-bottomed flask was added methyl 4-(2-amino-2-oxoethoxy)-5-(2-(4-fluorophenyl)-3-(methyl carbamoyl)benzofuran-5-yl)-2-methoxybenzoate (171.6 mg, 0.295 mmol) in a 1:1 mixture of methanol (7 mL) and THF (7 mL). To this solution was then added 4 eq. of 1M aqueous sodium hydroxide (1.2 mL, 1.2 mmol). The reaction mixture was stirred overnight at room temperature. Solvent was removed and the crude product was diluted with 50 mL of 1:1 DCM/ethyl acetate, washed sequentially with 10 mL of 1M HCl then brine. The product solution was dried over sodium sulfate, filtered and evaporated to dryness. The aqueous layers were combined, cooled in an ice bath and the product that formed on the sides of the flask were filtered and dried under vacuum. The solids were combined, taken up in 10 mL of DMF and purified using a Shimadzu preparative HPLC employing methanol/water/trifluoroacetic acid where solvent A was 10% methanol/90% water/0.1% trifluoroacetic acid and solvent B was 10% water/90% methanol/0.1% trifluoroacetic acid with a PHENOMENEX® Luna 10 μm C18 30×100 mm column at a gradient of 40-100% B and a flow rate of 40 mL/min. over 12 minutes with a 10 minute hold. Solvent was removed giving 87 mgs (60% yield) of 4-(2-amino-2-oxoethoxy)-5-(2-(4-fluorophenyl)-3-(methylcarbamoyl)benzofuran-5-yl)-2-methoxybenzoic acid as a white powder. The LC/MS data was obtained on a Shimadzu analytical LC/MICROMASS® Platform LC (ESI+) at 220 nm using the following set of conditions: Waters Sunfire 5 μm C18, 4.6×30 mm column, with a gradient of 0-100% B (B=90% HPLC grade methanol/0.1% trifluoroacetic acid/10% HPLC grade water), (A=90% HPLC grade water/0.1% trifluoroacetic acid/10% HPLC grade methanol), in 2 minutes with a 1 minute hold at a rate of 4 mL/minute. HPLC purity was determined using a Shimadzu analytical LC at 254 nm and 256 nm with a Waters Sunfire C18 3.5 μm 4.6×150 mm column employing water/acetonitrile/0.1% trifluoroacetic acid with a gradient of 10-100% B (B=95% HPLC grade acetonitrile/0.1% trifluoroacetic acid/5% HPLC grade water), (A=95% HPLC grade water/0.1% trifluoroacetic acid/5% HPLC grade acetonitrile), in 10 minutes with a 10 minute hold at a rate of 1 mL/minute. The HPLC purity was then confirmed with an orthogonal solvent system and column using a Shimadzu analytical LC with a Waters XBridge phenyl C18 3.5 μm 4.6×150 mm column employing water/methanol/10 mM ammonium bicarbonate with a gradient of 10-100% B (B=95% HPLC grade methanol/10 mM ammonium bicarbonate/5% HPLC grade water), (A=95% HPLC grade water/10 mM ammonium bicarbonate/5% HPLC grade methanol), in 10 minutes with a 10 minute hold at a rate of 1 mL/minute. 1H NMR (400 MHz, DMF-d7) δ ppm 2.97 (d, J=4.52 Hz, 3H), 4.02 (s, 3H), 4.79 (s, 2H), 6.97 (s, 1H), 7.31 (br. s., 1H), 7.38-7.46 (m, 2H), 7.51 (br. s., 1H), 7.67-7.77 (m, 2H), 7.92 (s, 1H), 7.95 (s, 1H), 8.09-8.16 (m, 2H), 8.35 (d, 1H). LCMS m/z 493.00 (M+H), Rt=1.618 min. HPLC (Sunfire C18) Rt=7.108 min, 100% purity and (XBridge phenyl C18) Rt=6.383 min., 99.3% purity.

후처리

  1. customSolvent was removed
  2. additionthe crude product was diluted with 50 mL of 1:1 DCM/ethyl acetate
  3. washwashed sequentially with 10 mL of 1M HCl
  4. dry with materialThe product solution was dried over sodium sulfate
  5. filtrationfiltered
  6. customevaporated to dryness
  7. temperaturecooled in an ice bath
  8. customthe product that formed on the sides of the flask
  9. filtrationwere filtered
  10. customdried under vacuum
  11. custompurified
  12. waita flow rate of 40 mL/min. over 12 minutes with a 10 minute hold
  13. customSolvent was removed

출처 및 근거

ORD 기록
ord-8152f1ab5c2d4ce9a9a4553d0f206d57
출처 데이터셋
uspto-grants-2011_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08048887B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트