홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethylenediamine → Propanenitrile, 3,3',3'',3'''-(1,2-ethanediyldinitrilo)tetrakis-

HRID 557985
인쇄

반응식

HRID 557985 반응식
[C:1](#[N:4])[CH:2]=[CH2:3].[CH2:5]([NH2:8])[CH2:6][NH2:7]>O>[CH2:5]([N:8]([CH2:3][CH2:2][C:1]#[N:4])[CH2:3][CH2:2][C:1]#[N:4])[CH2:6][N:7]([CH2:3][CH2:2][C:1]#[N:4])[CH2:3][CH2:2][C:1]#[N:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 3301EthylenediamineHCID 7855Acrylonitrile

생성물 1

HCID 3084891Propanenitrile, 3,3',3'',3'''-(1,2-ethanediyldinitrilo)tetrakis-수율 76.4%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
25 °C

실험 절차

Acrylonitrile (110 g, 137 cm3, 2.08 mol) was added to a vigorously stirred mixture of ethylenediamine (25 g, 27.8 cm3, 0.416 mol) and water (294 cm3) at 40° C. over 30 min. During the addition, it was necessary to cool the mixture with a 25° C. water bath to maintain temperature at 40° C. The mixture was then stirred for additional 2 hours at 40° C. and 2 hours at 80° C. Excess acrylonitrile and half of the water were evaporated off and the residue, on cooling to room temperature, gave a white solid which was recrystallised from MeOH-water (9:1) to give pure product 3,3′,3″,3′″-(ethane-1,2-diylbis(azanetriyl))tetrapropanenitrile (86.6 g, 76.4%) as white crystals, mp 63-65° C.

후처리

  1. additionDuring the addition, it
  2. temperatureto maintain temperature at 40° C
  3. customExcess acrylonitrile and half of the water were evaporated off
  4. temperaturethe residue, on cooling to room temperature
  5. customgave a white solid which
  6. customwas recrystallised from MeOH-water (9:1)

출처 및 근거

ORD 기록
ord-5e1bab357134470eb709bc577109a3a7
출처 데이터셋
uspto-grants-2011_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08062429B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트