Dimethyl Sulfoxide → 1-Methoxy-2,2,6,6-tetramethylpiperidin-4-one

HRID 567216

반응식

HRID 567216 반응식
[OH:1][N:2]1[C:7]([CH3:9])([CH3:8])[CH2:6][C:5](=[O:10])[CH2:4][C:3]1([CH3:12])[CH3:11].[CH3:13]S(C)=O.OO>O>[CH3:13][O:1][N:2]1[C:7]([CH3:8])([CH3:9])[CH2:6][C:5](=[O:10])[CH2:4][C:3]1([CH3:12])[CH3:11]

참가 물질

5

반응물 3

HCID 679Dimethyl SulfoxideHCID 784Hydrogen PeroxideHCID 986421-Hydroxy-2,2,6,6-tetramethyl-4-oxopiperidine

생성물 1

HCID 109761931-Methoxy-2,2,6,6-tetramethylpiperidin-4-one수율 78%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
30.5 °C

실험 절차

A 5.0 L 4 neck mechanically stirred flask is charged with 1oxyl-2,2,6,6-tetramethyl-4-piperidone (300 g, 1.76 moles), ferrous sulfate heptahydrate (513.7 g, 1.85 moles) and dimethylsulfoxide (1450 g). Hydrogen peroxide, 30% (279.2 g, 2.46 moles), is added over a 1 hour 45 min span. The temperature is maintained at 29-32° C. The content is stirred for an additional 30 min at 25-30° C. and then chilled below 1° C. Water (1250 ml) is added and the mixture is extracted with four 750 ml portions of ethyl acetate. The combined extracts are washed, 2×1.0 L of H2O, then 1×500 ml of saturated NaCl and then dried over anhydrous MgSO4. Ethyl acetate is evaporated and the product is distilled (82-84° C. 10.33×10−2 bar), yielding 254 g of a pale yellow oil (yield: 78% of theory; IR-spectrum: Ketone carbonyl, 1710 cm-1).

후처리

  1. temperaturechilled below 1° C
  2. extractionthe mixture is extracted with four 750 ml portions of ethyl acetate
  3. washThe combined extracts are washed
  4. dry with material2×1.0 L of H2O, then 1×500 ml of saturated NaCl and then dried over anhydrous MgSO4
  5. customEthyl acetate is evaporated
  6. distillationthe product is distilled (82-84° C. 10.33×10−2 bar)

출처 및 근거

ORD 기록
ord-a96b15b85c9246918e9ffc9db6f74dc4
출처 데이터셋
uspto-grants-2001_01
특허 번호
US06177491B1

연결된 노트

불러오는 중…