홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Iodine → 1,4-Pentadien-3-ol, 3-methyl-1-(2,6,6-trimethyl-1-cyclohexen-1-yl)-

HRID 567389
노트
인쇄 미리보기

반응식

HRID 567389 반응식
[Mg].II.[CH:4](Br)=[CH2:5].[CH3:7][C:8]1[CH2:13][CH2:12][CH2:11][C:10]([CH3:15])([CH3:14])[C:9]=1/[CH:16]=[CH:17]/[C:18]([CH3:20])=[O:19]>O1CCCC1>[CH3:7][C:8]1[CH2:13][CH2:12][CH2:11][C:10]([CH3:14])([CH3:15])[C:9]=1/[CH:16]=[CH:17]/[C:18]([OH:19])([CH:4]=[CH2:5])[CH3:20]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 807IodineHCID 11641Bromoethene2회HCID 638014I2-IononeHCID 5462224Magnesium

생성물 1

HCID 64368461,4-Pentadien-3-ol, 3-methyl-1-(2,6,6-trimethyl-1-cyclohexen-1-yl)-수율 87.5%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
-30 °C

실험 절차

1.3 mols of magnesium turnings are placed in a 3 L four-necked flask. 100 ml of tetrahydrofuran (THF) and a iodine crystal are added thereto. 50 ml of a 15% vinyl bromide solution in tetrahydrofuran are added with stirring and under nitrogen atmosphere. The solution immediately decolourizes, while the Grignard starts to form with an exothermic reaction: the mixture is cooled to −30° C. and one mol of beta-ionone dissolved in 500 ml of THF and 950 mL of the above 15% vinyl bromide solution are added at the same time through two dropping tunnels, at such a rate that temperature remains below −15 20° C. After completion of the addition, the cooling bath is removed and the reaction mixture is brought to room temperature. After 2 hours the reaction mixture is poured into 2 ml of ice-water containing 10 g of ammonium chloride under stirring, then is extracted with 700 ml of ethyl acetate. The organic phase is washed twice with 100 ml of 15% sodium chloride aqueous solution and dried over sodium sulfate. Solvent is evaporated off under reduced pressure and the resulting thick oil is distilled under vacuum, collecting 202 g of distillate, consisting of vinyl beta-ionol of purity higher than 95%, as determined by NMR analysis (yield: 87.5%).

후처리

  1. customto form with an exothermic reaction
  2. customremains below −15 20° C
  3. additionAfter completion of the addition
  4. customthe cooling bath is removed
  5. customis brought to room temperature
  6. additionAfter 2 hours the reaction mixture is poured into 2 ml of ice-water containing 10 g of ammonium chloride
  7. stirringunder stirring
  8. extractionis extracted with 700 ml of ethyl acetate
  9. washThe organic phase is washed twice with 100 ml of 15% sodium chloride aqueous solution
  10. dry with materialdried over sodium sulfate
  11. customSolvent is evaporated off under reduced pressure
  12. distillationthe resulting thick oil is distilled under vacuum
  13. distillationcollecting 202 g of distillate

출처 및 근거

ORD 기록
ord-96806ee6beac47ce8803dbe209115dcc
출처 데이터셋
uspto-grants-2001_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06177579B1

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트