홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethyl Bromide → N-(3-chloro-1-(pyridin-3-yl)-1H-pyrazol-4-yl)-N-ethylacetamide

HRID 57101
인쇄

반응식

HRID 57101 반응식
[Cl:1][C:2]1[C:6]([NH:7][C:8](=[O:10])[CH3:9])=[CH:5][N:4]([C:11]2[CH:12]=[N:13][CH:14]=[CH:15][CH:16]=2)[N:3]=1.[CH3:17][C:18](C)([O-])C.[Na+].C(Br)C>[I-].C([N+](CCCC)(CCCC)CCCC)CCC.O1CCCC1>[Cl:1][C:2]1[C:6]([N:7]([CH2:17][CH3:18])[C:8](=[O:10])[CH3:9])=[CH:5][N:4]([C:11]2[CH:12]=[N:13][CH:14]=[CH:15][CH:16]=2)[N:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 6332Ethyl BromideHCID 23676156Sodium t-butoxideHCID 118023019N-(3-chloro-1-(pyridin-3-yl)-1H-pyrazol-4-yl)acetamide

생성물 1

HCID 72194633N-(3-chloro-1-(pyridin-3-yl)-1H-pyrazol-4-yl)-N-ethylacetamide

시약·촉매·용매 2

HCID 67553Tetrabutylammonium Iodide촉매
HCID 8028
Tetrahydrofuran
용매

반응 조건

온도
38 °C

실험 절차

In a 125 mL 3-neck round-bottomed flask was added N-(3-chloro-1-(pyridin-3-yl)-1H-pyrazol-4-yl)acetamide (2.57 g, 9.44 mmol), tetrahydrofuran (55 mL), and sodium tert-butoxide (1.81 g, 18.9 mmol). The suspension was stirred for 5 minutes then ethyl bromide (1.41 mL, 18.9 mmol), and tetrabutylammonium iodide (67 mg, 0.2 mmol) were added. The resulting gray colored suspension was then heated to 38° C. The reaction was analyzed after 3 hours and found to have gone to 81% completion, after 24 hours the reaction was found to have gone to completion. The reaction mixture was allowed to cool to ambient temperature and quenched with ammonium hydroxide/formic acid (HCO2H) buffer (10 mL). The mixture was then diluted with tetrahydrofuran (40 mL), ethyl acetate (120 mL), and saturated sodium bicarbonate (30 mL). The layers were separated and the aqueous layer was extracted with ethyl acetate (2×30 mL). The organic layers were combined and silica gel (37 g) was added. The solvent was removed in vacuo to give a solid that was purified using semi-automated silica gel chromatography (RediSep Silica 220 g column; hexanes (0.2% triethylamine)/ethyl acetate, 40/60 to 0/100 gradient elution system, flow rate 150 mL/minutes) to give, after concentration, an orange solid weighing (2.19 g, 88%)

후처리

  1. waitThe reaction was analyzed after 3 hours
  2. waitto have gone to 81% completion, after 24 hours
  3. temperatureto cool to ambient temperature
  4. customquenched with ammonium hydroxide/formic acid (HCO2H) buffer (10 mL)
  5. additionThe mixture was then diluted with tetrahydrofuran (40 mL), ethyl acetate (120 mL), and saturated sodium bicarbonate (30 mL)
  6. customThe layers were separated
  7. extractionthe aqueous layer was extracted with ethyl acetate (2×30 mL)
  8. additionsilica gel (37 g) was added
  9. customThe solvent was removed in vacuo
  10. customto give a solid
  11. customthat was purified
  12. customto give
  13. concentrationafter concentration

출처 및 근거

ORD 기록
ord-1bead008847f464a91c50904eb7f281d
출처 데이터셋
uspto-grants-2016_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09434712B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트