홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Potassium Carbonate → 3-Methyl-4-[2-(trifluoromethyl)phenyl]benzoic acid

HRID 572545
인쇄

반응식

HRID 572545 반응식
Br[C:2]1[CH:11]=[CH:10][C:5]([C:6]([O:8]C)=[O:7])=[CH:4][C:3]=1[CH3:12].[F:13][C:14]([F:25])([F:24])[C:15]1[CH:20]=[CH:19][CH:18]=[CH:17][C:16]=1B(O)O.C(=O)([O-])[O-].[K+].[K+].[OH-].[Na+]>O1CCOCC1.C1CCC(P(C2CCCCC2)C2CCCCC2)CC1.C1CCC(P(C2CCCCC2)C2CCCCC2)CC1.[Cl-].[Cl-].[Pd+2].O>[CH3:12][C:3]1[CH:4]=[C:5]([C:6]([OH:8])=[O:7])[CH:10]=[CH:11][C:2]=1[C:16]1[CH:17]=[CH:18][CH:19]=[CH:20][C:15]=1[C:14]([F:25])([F:24])[F:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 11430Potassium CarbonateHCID 14798Sodium HydroxideHCID 27343872-(Trifluoromethyl)benzeneboronic acidHCID 3294148Methyl 4-bromo-3-methylbenzoate

생성물 1

HCID 219478123-Methyl-4-[2-(trifluoromethyl)phenyl]benzoic acid수율 92.3%

시약·촉매·용매 3

HCID 11556747
Bis(tricyclohexylphosphine)palladium(II) Dichloride
촉매
HCID 962Water용매
HCID 312751,4-Dioxane용매

반응 조건

온도
100 °C

실험 절차

A mixture of methyl 4-bromo-3-methylbenzoate (20 g, 87 mmol), 2-(trifluoromethyl)benzeneboronic acid (24.9 g, 131 mmol), potassium carbonate (24 g, 175 mmol) and bis(tricyclohexylphosphine)palladium (II) dichloride (65 mg, 0.1 mmol) was prepared in dioxane (200 mL) and water (50 mL) under N2 atmosphere. The mixture was heated at 100° C. for 3 hours. A 5N aqueous solution of NaOH (100 mL) was added and the reaction mixture was stirred at 100° C. for one additional hour. The reaction mixture was cooled at RT and the aqueous layer was removed. The organic layer was filtered through a celite pad, concentrated until 75 mL under reduced pressure, diluted with water (125 mL) and washed with MTBE (2×200 mL). The aqueous layer was acidified to pH 1 with a 5N aqueous solution of HCl (25 mL) and extracted with MTBE (2×100 mL). The organic layers were combined, dried (Na2SO4) and filtered through a celite pad. The solution was concentrated until 100 mL, then heptane was added (200 mL). The mixture was concentrated until 100 mL. The precipitate was filtered off and rinsed twice with heptane, then dried under reduced pressure to give the title compound as a white powder (22.5 g, 92%). HPLC (Method A), Rt 4.4 min (purity: 100%). LC/MS (Method B): 279.0 (M−H)−. 1H NMR (DMSO-d6, 300 MHz) δ 13.0 (s, 1H), 7.87 (m, 2H), 7.80 (dd, J=7.9, 1.6 Hz, 1H), 7.75 (m, 1H), 7.64 (m, 1H), 7.34 (d, J=7.6 Hz, 1H), 7.23 (d, J=7.9 Hz, 1H), 2.02 (s, 3H).

후처리

  1. temperatureThe reaction mixture was cooled at RT
  2. customthe aqueous layer was removed
  3. filtrationThe organic layer was filtered through a celite pad
  4. concentrationconcentrated until 75 mL under reduced pressure
  5. additiondiluted with water (125 mL)
  6. washwashed with MTBE (2×200 mL)
  7. extractionextracted with MTBE (2×100 mL)
  8. dry with materialdried (Na2SO4)
  9. filtrationfiltered through a celite pad
  10. concentrationThe solution was concentrated until 100 mL
  11. additionheptane was added (200 mL)
  12. concentrationThe mixture was concentrated until 100 mL
  13. filtrationThe precipitate was filtered off
  14. washrinsed twice with heptane
  15. customdried under reduced pressure

출처 및 근거

ORD 기록
ord-186a29c86085402ab37da8ffb572f150
출처 데이터셋
uspto-grants-2015_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09029405B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트