홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Nitrogen → 7-Methoxy-1-naphthaleneethanamine

HRID 572699
인쇄

반응식

HRID 572699 반응식
[CH3:1][O:2][C:3]1[CH:12]=[C:11]2[C:6]([CH:7]=[CH:8][CH:9]=[C:10]2[CH2:13][C:14]#[N:15])=[CH:5][CH:4]=1.O.N.N#N>[Ni].C(O)C>[CH3:1][O:2][C:3]1[CH:12]=[C:11]2[C:6]([CH:7]=[CH:8][CH:9]=[C:10]2[CH2:13][CH2:14][NH2:15])=[CH:5][CH:4]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 947NitrogenHCID 112640682-(7-Methoxynaphthalen-1-yl)acetonitrileHCID 12896473Azane;hydrate

생성물 1

HCID 110526677-Methoxy-1-naphthaleneethanamine수율 98%

시약·촉매·용매 2

HCID 935Nickel촉매HCID 702Ethanol용매

반응 조건

온도
60 °C

실험 절차

56 g 7-methoxy-1-naphthaleneacetonitrile, 120 ml ammonia water, 332 ml 95% ethanol, 20 g Raney-Ni were added into autoclave. H2 was introduced after vacuuming it. The operation was repeated for 3 times. The reaction was stirred for 12 hours while H2 was introduced and the condition of 300 atm and 60° C. was maintained. After completion of the reaction, the reaction was kept overnight at room temperature. On the next day, it was vacuumed and N2 gas was introduced. The autoclave was opened up, and the reaction solution was filtered to remove the catalyst. The filtrate was vacuum evaporated until dry to obtain 56 g light green oil. The content is measured as 96.95% by HPLC, and the yield is 95%.

후처리

  1. additionH2 was introduced
  2. additionwas introduced
  3. customAfter completion of the reaction
  4. waitthe reaction was kept overnight at room temperature
  5. filtrationthe reaction solution was filtered
  6. customto remove the catalyst
  7. customevaporated
  8. customuntil dry

출처 및 근거

ORD 기록
ord-b5a5db2d1d394bd89e4740104ffa279c
출처 데이터셋
uspto-grants-2015_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09029420B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트