홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium hydride → (5-chloropyridin-2-yl)methyl 4-isopropyl-1,4,6,7-tetrahydro-5H-imidazo[4,5-c]pyridine-5-carboxylate

HRID 575894
인쇄

반응식

HRID 575894 반응식
[H-].[Na+].[Cl:3][C:4]1[CH:5]=[CH:6][C:7]([CH2:10][OH:11])=[N:8][CH:9]=1.[CH:12]([CH:15]1[C:20]2[N:21]=[CH:22][NH:23][C:19]=2[CH2:18][CH2:17][N:16]1[C:24](OCC(Cl)(Cl)Cl)=[O:25])([CH3:14])[CH3:13]>C1COCC1>[CH:12]([CH:15]1[C:20]2[N:21]=[CH:22][NH:23][C:19]=2[CH2:18][CH2:17][N:16]1[C:24]([O:11][CH2:10][C:7]1[CH:6]=[CH:5][C:4]([Cl:3])=[CH:9][N:8]=1)=[O:25])([CH3:14])[CH3:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 24758Sodium hydride2회HCID 20537893(5-Chloropyridin-2-yl)methanol2회HCID 451108382,2,2-Trichloroethyl 4-isopropyl-1,4,6,7-tetrahydro-5H-imidazo[4,5-c]pyridine-5-carboxylate

생성물 1

HCID 58408390(5-chloropyridin-2-yl)methyl 4-isopropyl-1,4,6,7-tetrahydro-5H-imidazo[4,5-c]pyridine-5-carboxylate수율 1.2%

시약·촉매·용매 1

HCID 8028
Tetrahydrofuran
용매
3회

반응 조건

온도
0 °C

실험 절차

NaH (80.0 mg, 2.00 mmol, 60% dispersion in mineral oil) was suspended in THF (10 mL), the suspension was cooled to 0° C. and 5-chloropyridine-2-methanol (0.29 g, 2.00 mmol) was added. The suspension was stirred at 0° C. for 30 min then added to a solution of Intermediate 2 (0.65 g, 2.00 mmol, 70% pure) in THF (10 mL) and the reaction mixture was stirred at room temperature. Two additional such portions of NaH and 5-chloropyridine-2-methanol in THF were added after 2 and 3 d, respectively. After 4 d the reaction mixture was quenched with water (10 mL) and the solvents were removed in vacuo. The solvents were removed in vacuo and the residue was dissolved in EtOAc (100 mL) washed with 1 M aq Na2CO3 solution (4×100 mL), dried (MgSO4) and the solvents were removed in vacuo. The residue was purified by column chromatography (normal phase, 20 g, Strata SI-1, silica gigatube, DCM (200 mL) followed by 2%, 4%, 5% and 10% MeOH in DCM (200 mL each)) and reverse phase HPLC (Phenomenex Synergi, RP-Hydro 150×10 mm, 10 μm, 15 mL/min, gradient 20% to 80% (over 12 min) to 100% (over 3 min) MeOH in water (1% formic acid)). The residue was de-salted using K2CO3 to give (5-chloropyridin-2-yl)methyl 4-isopropyl-1,4,6,7-tetrahydro-5H-imidazo[4,5-c]pyridine-5-carboxylate (7.91 mg, 1.2%) as a white solid.

후처리

  1. stirringthe reaction mixture was stirred at room temperature
  2. customAfter 4 d the reaction mixture was quenched with water (10 mL)
  3. customthe solvents were removed in vacuo
  4. customThe solvents were removed in vacuo
  5. dissolutionthe residue was dissolved in EtOAc (100 mL)
  6. washwashed with 1 M aq Na2CO3 solution (4×100 mL)
  7. dry with materialdried (MgSO4)
  8. customthe solvents were removed in vacuo
  9. customThe residue was purified by column chromatography (normal phase, 20 g, Strata SI-1, silica gigatube, DCM (200 mL) followed by 2%, 4%, 5% and 10% MeOH in DCM (200 mL each))
  10. customphase HPLC (Phenomenex Synergi, RP-Hydro 150×10 mm, 10 μm, 15 mL/min, gradient 20% to 80% (over 12 min) to 100% (over 3 min) MeOH in water (1% formic acid))

출처 및 근거

ORD 기록
ord-8a0fee44494b42548c315650661c8f5f
출처 데이터셋
uspto-grants-2015_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09035066B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트