Phenylphosphonic Acid → Zinc Oxide

HRID 576027

반응식

HRID 576027 반응식
[O-2].[Zn+2:2].[C:3]1([P:9](=[O:12])([OH:11])[OH:10])[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1>O>[O-2:10].[Zn+2:2].[C:3]1([P:9](=[O:10])([O-:12])[O-:11])[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1.[Zn+2:2]

참가 물질

5

반응물 2

HCID 15295Phenylphosphonic AcidHCID 3007857Zinc Oxide

생성물 2

HCID 3007857Zinc OxideHCID 15878909Phosphonic acid, P-phenyl-, zinc salt (1:1)

시약·촉매·용매 1

HCID 962Water용매2회

실험 절차

An aqueous slurry of zinc oxide was prepared by charging a 300 mL reaction flask equipped with a stirrer with 10.0 g (123 mmol) of zinc oxide (JIS grade 2, available from HakusuiTech Ltd.) and 90.0 g of water. An aqueous solution of 19.4 g (123 mmol) of phenylphosphonic acid (Nissan Chemical Industries, Ltd.) dissolved in 110.0 g of water was gradually added dropwise at room temperature (about 25° C.) to this slurry with stirring, thereby effecting a reaction for five hours. The slurry was then filtered and the wet cake was thoroughly rinsed with water. The wet cake was subsequently dried at 120° C. for at least 12 hours, yielding a white powder of zinc phenylphosphonate. FIG. 2 shows a micrograph taken with a field-emission scanning electron microscope (SEM: JSM-7400F, manufactured by JEOL Ltd.) of the white powder of zinc phenylphosphonate thus obtained.

후처리

  1. customa 300 mL reaction flask
  2. additionwas gradually added dropwise at room temperature (about 25° C.) to this slurry
  3. customa reaction for five hours
  4. filtrationThe slurry was then filtered
  5. washthe wet cake was thoroughly rinsed with water
  6. customThe wet cake was subsequently dried at 120° C. for at least 12 hours

출처 및 근거

ORD 기록
ord-417d0d8778664dcdb38fa7a0babaec53
출처 데이터셋
uspto-grants-2015_05
특허 번호
US09035100B2

연결된 노트

불러오는 중…