홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

1-Butanol → 3-[7-(3,5-Dimethylisoxazol-4-yl)-2-oxo-1,2,4,5-tetrahydroimidazo[1,5,4-de][1,4]benzoxazin-4-yl]pyridine-2-carbonitrile

HRID 589107
노트
인쇄 미리보기

반응식

HRID 589107 반응식
[F-].[Cs+].Br[C:4]1[C:13]2[O:12][CH2:11][CH:10]([C:14]3[C:15]([C:20]#[N:21])=[N:16][CH:17]=[CH:18][CH:19]=3)[N:9]3[C:22](=[O:24])[NH:23][C:7]([C:8]=23)=[CH:6][CH:5]=1.[CH3:25][C:26]1[C:30](B(O)O)=[C:29]([CH3:34])[O:28][N:27]=1.C(O)CCC>C(P(C(C)(C)C)C1C=CC(N(C)C)=CC=1)(C)(C)C.Cl[Pd]Cl.O>[CH3:25][C:26]1[C:30]([C:4]2[C:13]3[O:12][CH2:11][CH:10]([C:14]4[C:15]([C:20]#[N:21])=[N:16][CH:17]=[CH:18][CH:19]=4)[N:9]4[C:22](=[O:24])[NH:23][C:7]([C:8]=34)=[CH:6][CH:5]=2)=[C:29]([CH3:34])[O:28][N:27]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 2631-ButanolHCID 25953Cesium fluorideHCID 27343463,5-Dimethylisoxazole-4-boronic acidHCID 904099623-(7-Bromo-2-oxo-1,2,4,5-tetrahydroimidazo[1,5,4-de][1,4]benzoxazin-4-yl)pyridine-2-carbonitrile

생성물 1

HCID 862991793-[7-(3,5-Dimethylisoxazol-4-yl)-2-oxo-1,2,4,5-tetrahydroimidazo[1,5,4-de][1,4]benzoxazin-4-yl]pyridine-2-carbonitrile수율 90.7%

시약·촉매·용매 2

HCID 86647055di-tert-butyl(4-dimethylaminophenylphosphine) dichloropalladium(II)촉매HCID 962Water용매

반응 조건

온도
100 °C

실험 절차

A sealed tube containing 4-(di-tert-butylphosphino)-N,N-dimethylaniline-dichloropalladium (2:1) (11.5 mg, 0.0162 mmol), cesium fluoride (574 mg, 3.78 mmol), 3-(7-bromo-2-oxo-1,2,4,5-tetrahydroimidazo[1,5,4-de][1,4]benzoxazin-4-yl)pyridine-2-carbonitrile (386 mg, 1.01 mmol) and (3,5-dimethylisoxazol-4-yl)boronic acid (533 mg, 3.78 mmol) was placed under vacuum and back-filled with nitrogen (repeated 3×). The sealed tube was charged with 1-butanol (4.92 mL) and water (1.2 mL) and the mixture was degassed by bubbling nitrogen for 15 min and heated at 100° C. for 2 h. The reaction mixture was diluted with ethyl acetate, washed with water and brine, dried over magnesium sulfate, filtered, and concentrated to give the crude product. Purification by preparative LCMS (XBridge C18 column, eluting with a gradient of acetonitrile/water containing 0.1% ammonium hydroxide, at flow rate of 60 mL/min) gave the desired product (342 mg, 85%) as a racemic mixture. 1H NMR (300 MHz, DMSO-d6) δ 11.00 (br s, 1H), 8.81-8.66 (m, 1H), 7.80-7.62 (m, 2H), 6.90 (d, J=8.0 Hz, 1H), 6.80 (d, J=8.0 Hz, 1H), 5.74-5.51 (m, 1H), 4.58 (d, J=3.4 Hz, 2H), 2.29 (s, 3H), 2.12 (s, 3H); LCMS calculated for C20H16N5O3 (M+H)+: m/z=374.1. found: 374.1.

후처리

  1. additionback-filled with nitrogen (repeated 3×)
  2. customthe mixture was degassed
  3. customby bubbling nitrogen for 15 min
  4. additionThe reaction mixture was diluted with ethyl acetate
  5. washwashed with water and brine
  6. dry with materialdried over magnesium sulfate
  7. filtrationfiltered
  8. concentrationconcentrated
  9. customto give the crude product
  10. customPurification by preparative LCMS (XBridge C18 column
  11. washeluting with a gradient of acetonitrile/water containing 0.1% ammonium hydroxide, at flow rate of 60 mL/min)

출처 및 근거

ORD 기록
ord-d1483cab99ca420e8c6b9cf7116d5b73
출처 데이터셋
uspto-grants-2016_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09227985B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트