4-Chlorobenzaldehyde → 5-[(4-Chlorophenyl)methylidene]-2,2-dimethylcyclopentan-1-one

HRID 5933

반응식

HRID 5933 반응식
[OH-].[Na+].[CH3:3][C:4]1([CH3:10])[CH2:8][CH2:7][CH2:6][C:5]1=[O:9].[Cl:11][C:12]1[CH:19]=[CH:18][C:15]([CH:16]=O)=[CH:14][CH:13]=1>C(O)C>[CH3:3][C:4]1([CH3:10])[CH2:8][CH2:7][C:6](=[CH:16][C:15]2[CH:18]=[CH:19][C:12]([Cl:11])=[CH:13][CH:14]=2)[C:5]1=[O:9]

참가 물질

5

반응물 3

HCID 77264-ChlorobenzaldehydeHCID 14798Sodium HydroxideHCID 1382862,2-Dimethylcyclopentanone

생성물 1

HCID 534210215-[(4-Chlorophenyl)methylidene]-2,2-dimethylcyclopentan-1-one수율 59.7%

시약·촉매·용매 1

HCID 702Ethanol용매

실험 절차

100 ml of a 10% aqueous solution of sodium hydroxide were added to a mixture of 10 g of 2,2-dimethylcyclopentanone and 13.8 g of 4-chlorobenzaldehyde in 100 ml of ethanol at 0° C. After 30 minutes, a thick slurry was filtered off and the solid washed and then dried. 12.5 g of 2,2-dimethyl-5-(4-chlorobenzylidene)-1-cyclopentanone with a melting point of 120° C. were obtained. This compound, dissolved in 50 ml of THF, was added to a solution formed in the following manner: 1.9 g of sodium hydride (80% dispersion in mineral oil) in 50 ml of anhydrous DMSO were heated to 80° C. until complete dissolution of the solid. The solution was then diluted with 100 ml of THF, then cooled to -10° C. A solution of 11.5 g of trimethylsulphonium iodide in 80 ml of dimethyl sulphoxide were added to the mixture in the course of ten minutes and the mixture was stirred for 15 minutes at -10° C. A solution of 11.8 g of 2,2-dimethyl-4-chloro-5-(4-chlorobenzylidene)-1-cyclopentanone was then added in 100 ml of THF.

후처리

  1. filtrationa thick slurry was filtered off
  2. washthe solid washed
  3. customdried

출처 및 근거

ORD 기록
ord-f7c11daffec247348ae0459b122a7bd7
출처 데이터셋
uspto-grants-1993_09
특허 번호
US05246954

연결된 노트

불러오는 중…