홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Iodine → N-(2',6'-Dichlorophenyl)-4-methylaniline

HRID 603345
인쇄

반응식

HRID 603345 반응식
[Cl:1][C:2]1[CH:8]=[CH:7][CH:6]=[C:5]([Cl:9])[C:3]=1[NH2:4].CO[C:12]1[CH2:17][CH:16]=[C:15]([CH3:18])[CH2:14][CH:13]=1.II>O1CCCC1.ClC1C=CC=CC=1.C(O)(=O)C.CCCCCC.C(OC)(C)(C)C.[Ti](Cl)(Cl)(Cl)Cl>[Cl:1][C:2]1[CH:8]=[CH:7][CH:6]=[C:5]([Cl:9])[C:3]=1[NH:4][C:12]1[CH:17]=[CH:16][C:15]([CH3:18])=[CH:14][CH:13]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 3

HCID 807Iodine2회HCID 118462,6-DichloroanilineHCID 114349421-Methoxy 4-methylcyclohexa-1,4-diene

생성물 1

HCID 57952151N-(2',6'-Dichlorophenyl)-4-methylaniline

시약·촉매·용매 5

HCID 24193Titanium Tetrachloride촉매HCID 176Acetic Acid용매
HCID 7964Chlorobenzene용매
HCID 8028Tetrahydrofuran용매2회
HCID 21982663Methyl t-butylether hexane용매

반응 조건

온도
-35 °C

실험 절차

A solution of 4.35 g 2,6-dichloro-aniline in 4 ml of tetrahydrofuran and 35 ml of chlorobenzene is cooled down to −40 to −45° C. At this temperature, 5.09 g of titanium-tetrachloride is added to the solution, followed by the addition of 5.0 g of 1-Methoxy-4-methylcyclohexa-1,4-diene. The reaction mixture is allowed to warm up to approximately −35° C. and stirred for 2 hours at this temperature. A solution of 10.18 g of iodine in 20 ml of tetrahydrofuran and 2.3 ml of acetic acid is then added dropwise to the reaction mixture and the temperature was allowed to warm up to 0° C. The mixture was stirred for 1 hour at 0° C. and 16 hours at 25° C. Then 3.4 g of iodine is added to the reaction mixture and stirring is continued for additional 24 hours at 25° C. The reaction is finally quenched by pouring the reaction mixture onto a mixture of 250 ml of aqueous Sodium bisulfite (38-40%) and 400 ml of saturated aqueous sodium carbonate. The water phase is extracted with ethyl acetate (1×200 ml and 2×100 ml), the ethyl acetate phases are unified and washed with 100 ml of water. The organic phase was dried over anhydrous sodium sulfate and evaporated in vacuo to yield 11.44 g of a dark slurry. The slurry was dissolved in hexane/t-butyl-methylether and the solution was filtered over silica gel to obtain, after evaporation of the solvent, 5.75 g of erode product. The product can be used directly in the next step. Alternatively, h can be purified e.g. by column chromatography on silica gel with hexane/t-butyl-methylether (9:1) as eluent to yield pure N-(2′,6′-Dichlorophenyl)-4-methylaniline.

후처리

  1. temperatureto warm up to 0° C
  2. stirringThe mixture was stirred for 1 hour at 0° C. and 16 hours at 25° C
  3. stirringstirring
  4. waitis continued for additional 24 hours at 25° C
  5. customThe reaction is finally quenched
  6. additionby pouring the reaction mixture
  7. additiononto a mixture of 250 ml of aqueous Sodium bisulfite (38-40%) and 400 ml of saturated aqueous sodium carbonate
  8. extractionThe water phase is extracted with ethyl acetate (1×200 ml and 2×100 ml)
  9. washwashed with 100 ml of water
  10. dry with materialThe organic phase was dried over anhydrous sodium sulfate
  11. customevaporated in vacuo
  12. customto yield 11.44 g of a dark slurry
  13. filtrationthe solution was filtered over silica gel
  14. customto obtain
  15. customafter evaporation of the solvent, 5.75 g of erode product
  16. customAlternatively, h can be purified e.g. by column chromatography on silica gel with hexane/t-butyl-methylether (9:1) as eluent

출처 및 근거

ORD 기록
ord-a48e9eb40ba04c6e9e7ae90631938123
출처 데이터셋
uspto-grants-2011_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07906677B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트