홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzene → Triphenylborane

HRID 616865
인쇄

반응식

HRID 616865 반응식
[Na].[CH:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.Cl[C:9]1[CH:14]=[CH:13][CH:12]=[CH:11][CH:10]=1.[B:15]([O-])([O-])OC(C)C.[CH2:22]1[CH2:27][CH2:26][CH2:25][CH2:24][CH2:23]1>O>[C:2]1([B:15]([C:22]2[CH:27]=[CH:26][CH:25]=[CH:24][CH:23]=2)[C:9]2[CH:14]=[CH:13][CH:12]=[CH:11][CH:10]=2)[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 241BenzeneHCID 7964Chlorobenzene2회HCID 8078Cyclohexane2회HCID 5360545SodiumHCID 71368315Isopropylborate2회

생성물 1

HCID 70400Triphenylborane수율 85.4%

시약·촉매·용매 1

HCID 962
Water
용매

반응 조건

온도
80 °C

실험 절차

The apparatus employed consisted of a 500 ml four-necked flask equipped with a mechanical stirrer, thermometer, addition funnel and reflux condenser with suitable provisions to maintain a nitrogen atmosphere over the reactants. Approximately 3.8 grams of sodium dispersion (particle size 1-5μ) were premixed with 40 ml of cyclohexane and 2 ml of benzene and charged to the flask. The contents of the flask were then heated to 80° C. A solution containing 9.0 grams of chlorobenzene and 4.7 grams of isopropyl orthoborate in 45 ml of cyclohexane was then added to the flask over a period of 60 minutes while the temperature of the contents were maintained at 80° C. After addition of the chlorobenzene and isopropyl orthoborate the contents of the flask were permitted to cool slowly at room temperature following which 60 ml of water were introduced into the flask. The resultant aqueous and organic phases were removed from the flask and separated. The aqueous phase which contained the sodium salt of triphenylborane was charged to a standard laboratory distillation column where the alcohol was removed by azeotropic distillation at 70°-100° C. over a period of 2 hours. The tails from the distillation were titrated at room temperature with 2.10N hydrochloric acid to a pH of 7.2 whereupon triphenylborane precipitated. The resultant slurry was filtered. The white filter cake was washed with water and vacuum dried to obtain 5.17 grams of triphenylborane (85.4% yield).

후처리

  1. customThe apparatus employed consisted of a 500 ml four-necked flask
  2. customequipped with a mechanical stirrer
  3. additionthermometer, addition funnel
  4. temperaturereflux condenser with suitable provisions
  5. temperatureto maintain a nitrogen atmosphere over the reactants
  6. additioncharged to the flask
  7. additionwas then added to the flask over a period of 60 minutes while the temperature of the contents
  8. temperaturewere maintained at 80° C
  9. temperatureto cool slowly at room temperature
  10. additionwere introduced into the flask
  11. customThe resultant aqueous and organic phases were removed from the flask
  12. customseparated
  13. additionwas charged to a standard laboratory distillation column where the alcohol
  14. customwas removed by azeotropic distillation at 70°-100° C. over a period of 2 hours
  15. distillationThe tails from the distillation
  16. customwere titrated at room temperature with 2.10N hydrochloric acid to a pH of 7.2 whereupon triphenylborane
  17. customprecipitated
  18. filtrationThe resultant slurry was filtered
  19. washThe white filter cake was washed with water and vacuum
  20. customdried

출처 및 근거

ORD 기록
ord-d930b88880b34d239e56ff3a306963e2
출처 데이터셋
uspto-grants-1978_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04076756

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트