홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Dimethyl Sulfate → N-Methyl Morpholinium Acetonitrile

HRID 619666
노트
인쇄 미리보기

반응식

HRID 619666 반응식
[N:1]1([CH2:7]C#N)[CH2:6][CH2:5][O:4][CH2:3][CH2:2]1.S(OC)(OC)(=O)=O>C(OCC)(=O)C>[C:2](#[N:1])[CH3:3].[CH3:7][NH+:1]1[CH2:6][CH2:5][O:4][CH2:3][CH2:2]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 6497Dimethyl SulfateHCID 220554-Morpholineacetonitrile

생성물 1

HCID 86752400N-Methyl Morpholinium Acetonitrile수율 79%

시약·촉매·용매 1

HCID 8857Ethyl Acetate용매

반응 조건

온도
40 °C

실험 절차

To a solution of 30 g of morpholine acetonitrile in 75 ml of ethyl acetate was added 22.5 ml of dimethyl sulfate, corresponding to approximately equivalent molar amounts of the two reagents. The resulting solution was mechanically stirred in an oil bath maintained at 40° C. After 10 minutes of stirring, a semi-solid precipitate having a brownish coloration formed and settled on the bottom of the flask. HPLC (high pressure liquid chromatography) analysis showed at least 4 undesirable side products, which were removed. The remaining solution was again heated to 40° C. and reacted for an additional 16 hours. After this time, the resulting white paste was filtered and washed with ethyl acetate. MMA was isolated after drying this filtrate as a free flowing off-white solid in 79% yield, having a melting point of 99-101° C. The purity of the MMA was determined by HPLC to be greater than 95%.

후처리

  1. stirringAfter 10 minutes of stirring
  2. customformed
  3. customwere removed
  4. temperatureThe remaining solution was again heated to 40° C.
  5. customreacted for an additional 16 hours
  6. filtrationAfter this time, the resulting white paste was filtered
  7. washwashed with ethyl acetate
  8. customMMA was isolated
  9. customafter drying this filtrate as

출처 및 근거

ORD 기록
ord-bc829b06569b4fba801394715c3add93
출처 데이터셋
uspto-grants-1999_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05959104

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트