홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1,3-Propanediol → 3-(Hexadecyloxy)propan-1-ol

HRID 624682
인쇄

반응식

HRID 624682 반응식
[CH2:1]([OH:5])[CH2:2][CH2:3][OH:4].[H-].[Na+].CS(O[CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH2:27][CH3:28])(=O)=O>CN1C(=O)CCC1.O.CO>[CH2:28]([O:4][CH2:3][CH2:2][CH2:1][OH:5])[CH2:27][CH2:26][CH2:25][CH2:24][CH2:23][CH2:22][CH2:21][CH2:20][CH2:19][CH2:18][CH2:17][CH2:16][CH2:15][CH2:14][CH3:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 104421,3-PropanediolHCID 24758Sodium hydrideHCID 519810Hexadecyl methanesulfonate

생성물 1

HCID 1657533-(Hexadecyloxy)propan-1-ol수율 77%

시약·촉매·용매 3

HCID 887Methanol용매HCID 962Water용매
HCID 13387
N-methyl-2-pyrrolidone
용매
2회

반응 조건

온도
0 °C

실험 절차

Under an inert atmosphere, e.g., nitrogen, a reactor was charged with 1,3-propanediol (4.07 kg) and NMP (30 L). The reaction was cooled to −5 to 5° C. and kept under a nitrogen atmosphere. Sodium hydride (1.07 kg, 60% in mineral oil) was cautiously added portion-wise. After the addition was complete, the reaction was stirred at room temperature for an additional 2 hours. A solution of hexadecyl methanesulfonate 4 (4.39 kg) dissolved in NMP (10 L) was added slowly to the reaction mixture at 20 to 55° C. The resulting solution was stirred for 12 to 28 hours at 20 to 35° C. The reaction was monitored by GC-MS and was considered complete when the conversion rate was ≧95%. The reaction mixture was cooled down to −5 to 5° C. and slowly diluted with water (15 L). The reaction was extracted with ethyl acetate (2×25 L). The organic phase was washed with water (20 L), dried over Na2SO4 and concentrated to give a brown oil. The crude product was dissolved in methanol (20 L) and aged at 20 to 30° C. for 12 hours. The resulting solid impurities were filtered and discarded and the filtrate was concentrated. Acetonitrile (40 L) was added to the concentrate and the mixture was aged 5 to 15° C. for 16 hours. The solid was filtered and dried at 25 to 30° C. to afford 5 as a white solid (3.1 kg, 77%). Typical HPLC (AUC) purity was >95%. 1H-NMR was consistent with structure.

후처리

  1. additionAfter the addition
  2. additionwas added slowly to the reaction mixture at 20 to 55° C
  3. stirringThe resulting solution was stirred for 12 to 28 hours at 20 to 35° C
  4. temperatureThe reaction mixture was cooled down to −5 to 5° C.
  5. extractionThe reaction was extracted with ethyl acetate (2×25 L)
  6. washThe organic phase was washed with water (20 L)
  7. dry with materialdried over Na2SO4
  8. concentrationconcentrated
  9. customto give a brown oil
  10. waitaged at 20 to 30° C. for 12 hours
  11. filtrationThe resulting solid impurities were filtered
  12. concentrationthe filtrate was concentrated
  13. additionAcetonitrile (40 L) was added to the
  14. concentrationconcentrate
  15. waitthe mixture was aged 5 to 15° C. for 16 hours
  16. filtrationThe solid was filtered
  17. customdried at 25 to 30° C.

출처 및 근거

ORD 기록
ord-ae6af8ba685343e3b2ca275393d005b3
출처 데이터셋
uspto-grants-2016_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09303051B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트