홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetaldehyde → Methyl 2-amino-5-methyl-1,3-thiazole-4-carboxylate

HRID 630282
인쇄

반응식

HRID 630282 반응식
C[O-].[Na+].Cl[CH:5](Cl)[C:6]([O:8][CH3:9])=[O:7].[CH:11](=O)[CH3:12].[NH2:14][C:15]([NH2:17])=[S:16]>C(OCC)C.O>[NH2:17][C:15]1[S:16][C:11]([CH3:12])=[C:5]([C:6]([O:8][CH3:9])=[O:7])[N:14]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 177AcetaldehydeHCID 8315Methyl dichloroacetateHCID 2723790ThioureaHCID 10942334Sodium Methoxide

생성물 1

HCID 1132801Methyl 2-amino-5-methyl-1,3-thiazole-4-carboxylate수율 35.8%

시약·촉매·용매 2

HCID 962Water용매
HCID 3283
Diethyl Ether
용매

반응 조건

온도
0 °C

실험 절차

Sodium methoxide (25% wt solution, 50 mL) was added slowly to a 0° C. solution of methyl 2,2-dichloroacetate (25 mL, 261 mmol) and acetaldehyde (15 mL, 267 mmol) in 200 mL diethyl ether. The mixture was stirred at 0° C. for 1 hour. Water (100 mL) was added, and the organic layer was recovered. The aqueous phase was extracted with diethyl ether (2×100 mL). The organic extracts were combined, washed with brine (2×200 mL), dried over MgSO4, filtered, evaporated, and dried in vacuo. The crude oil (29 g) was dissolved in MeOH (250 mL), and thiourea (15.5 g, 190 mmol) was added. The solution was stirred at reflux for 4 hours. After cooling to room temperature, the solvent was evaporated. The oily residue was dissolved in MeOH (50 mL). The solution was poured into ice/water (500 mL). The pH was brought to approximately 8-9 with concentrated ammonium hydroxide. The yellow solid material was recovered by filtration, washed with water (3×50 mL) and hexanes (3×50 mL), and dried in vacuo, affording methyl 2-amino-5-methyl-1,3-thiazole-4-carboxylate (11.7 g, 26%) as a yellow solid. The product was used without further purification.

후처리

  1. customthe organic layer was recovered
  2. extractionThe aqueous phase was extracted with diethyl ether (2×100 mL)
  3. washwashed with brine (2×200 mL)
  4. dry with materialdried over MgSO4
  5. filtrationfiltered
  6. customevaporated
  7. customdried in vacuo
  8. dissolutionThe crude oil (29 g) was dissolved in MeOH (250 mL)
  9. stirringThe solution was stirred
  10. temperatureat reflux for 4 hours
  11. temperatureAfter cooling to room temperature
  12. customthe solvent was evaporated
  13. dissolutionThe oily residue was dissolved in MeOH (50 mL)
  14. additionThe solution was poured into ice/water (500 mL)
  15. filtrationThe yellow solid material was recovered by filtration
  16. washwashed with water (3×50 mL) and hexanes (3×50 mL)
  17. customdried in vacuo

출처 및 근거

ORD 기록
ord-40864a1ce7404b98a930e9b8104e858e
출처 데이터셋
uspto-grants-2016_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09315521B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트