홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Ethyl Methacrylate → 2-Hydroxypropyl methacrylate

HRID 634530
인쇄

반응식

HRID 634530 반응식
[C:1]([OH:6])(=[O:5])[C:2]([CH3:4])=[CH2:3].CC1C2C(=CC3C(C=2)=CC=CC=3)C=CC=1.C(OCCCO)(=O)C(C)=C.C(OCC)(=O)C(C)=C.C([O:43][CH:44]([CH3:48])[CH2:45]OC)(=O)C>>[CH3:45][CH:44]([OH:43])[CH2:48][O:5][C:1]([C:2]([CH3:4])=[CH2:3])=[O:6]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 4

HCID 7343Ethyl MethacrylateHCID 7946Propylene glycol methyl ether acetateHCID 176943-Hydroxypropyl methacrylateHCID 87125978Methylanthracene methacrylate

생성물 1

HCID 135392-Hydroxypropyl methacrylate

반응 조건

온도
40 °C

실험 절차

A polymer feed solution was prepared by combining 30.76 g methylanthracene methacrylate monomer, 16.6 g 3-hydroxypropyl methacrylate monomer, 16.0 g ethyl methacrylate, and 50 g propylene glycol monomethyl ether acetate (PGMEA) in a 250 ml three neck, round-bottom flask fitted with a mechanical stirrer, thermal controller, thermal probe, heating mantle and nitrogen purge inlet (sweep). The reaction mixture was heated until the temperature of the reaction mixture reached 80° C. 16.15 g PGMEA solution containing 10 wt % Vazo 67 azo initiator (white powder, Dupont) was next added to the flask. The flask was heated until the temperature of the reaction mixture reached 90° C. and maintained for 8 hours with stirring. Heating was stopped and the reactor was allowed to cool down to 40° C. The resulting polymer solution was precipitated with methyl alcohol (10× excess of reaction mixture), filtered and vacuum dried, to provide Poly(ANTMA-co-HPMA-co-EMA) polymer [Mw=8K; PDI=2.5; ANTMA:HPMA; EMA=30:30:40 mol %, by 13C-NMR].

후처리

  1. customA polymer feed solution was prepared
  2. customfitted with a mechanical stirrer
  3. temperaturethermal controller, thermal probe, heating mantle and nitrogen
  4. custompurge inlet (sweep)
  5. temperatureThe reaction mixture was heated until the temperature of the reaction mixture
  6. customreached 80° C
  7. addition16.15 g PGMEA solution containing 10 wt % Vazo 67 azo initiator (white powder, Dupont)
  8. additionwas next added to the flask
  9. temperatureThe flask was heated until the temperature of the reaction mixture
  10. customreached 90° C.
  11. temperaturemaintained for 8 hours
  12. temperatureHeating
  13. customThe resulting polymer solution was precipitated with methyl alcohol (10× excess of reaction mixture)
  14. filtrationfiltered
  15. customvacuum dried

출처 및 근거

ORD 기록
ord-c9da4760507f4314a70b74da3feaa588
출처 데이터셋
uspto-grants-2016_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09324604B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트