홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 3'-(Trifluoromethyl)acetophenone

HRID 634975
인쇄

반응식

HRID 634975 반응식
Cl.N[C:3]1[CH:4]=[C:5]([C:9]([F:12])([F:11])[F:10])[CH:6]=[CH:7][CH:8]=1.N([O-])=[O:14].[Na+].[CH:17](=NO)[CH3:18]>O.O.S([O-])([O-])(=O)=O.[Cu+2]>[CH3:18][C:17]([C:3]1[CH:8]=[CH:7][CH:6]=[C:5]([C:9]([F:12])([F:11])[F:10])[CH:4]=1)=[O:14]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 73753-(Trifluoromethyl)anilineHCID 7863AldoximeHCID 23668193Sodium Nitrite

생성물 1

HCID 676823'-(Trifluoromethyl)acetophenone수율 51.8%

시약·촉매·용매 2

HCID 61499Cupric sulfate monohydrate촉매
HCID 962Water용매3회

반응 조건

온도
-7.5 °C

실험 절차

Under nitrogen, 1290 g of water and 740 g of hydrochloric acid (30% by weight strength) were initially charged and cooled to from −10 to −5° C. At below −5° C., 334 g of 3-aminobenzotrifluoride were then metered in (content 99.9%). 149 g of sodium nitrite were dissolved in 690 g of water and metered in at below 0° C. over the course of 2 hours. The mixture was then stirred for another 1 hour. Under nitrogen, an initial charge of 24 g of copper sulphate hydrate, 73 g of water and 183 g of acetaldoxime was heated to 28° C., and the diazonium salt solution which had been prepared beforehand was metered in with intensive stirring over the course of 2 hours. The mixture was allowed to react at 30° C. for another 30 minutes. After 1 hour, the mixture was heated to 100° C. and the crude product was distilled off together with water. After the removal of the water from the distillate, the crude product was distilled over a column. 202 g of 3-trifluoromethylacetophenone were obtained (content according to GC 99.1%). This corresponds to a yield of 51.5% of theory.

후처리

  1. customAt below −5° C.
  2. custommetered in at below 0° C. over the course of 2 hours
  3. temperaturewas heated to 28° C.
  4. stirringwith intensive stirring over the course of 2 hours
  5. customto react at 30° C. for another 30 minutes
  6. waitAfter 1 hour
  7. temperaturethe mixture was heated to 100° C.
  8. distillationthe crude product was distilled off together with water
  9. customAfter the removal of the water from the distillate
  10. distillationthe crude product was distilled over a column

출처 및 근거

ORD 기록
ord-856ebad90a3e4f7085e22062f983700b
출처 데이터셋
uspto-grants-2001_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06184417B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트