홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phosphoric Acid → HCID 131737206, 화합물

HRID 63778
인쇄

반응식

HRID 63778 반응식
[CH3:1][N:2]1[CH2:19][CH:18]2[CH:4]([C:5]3[CH:6]=[CH:7][CH:8]=[CH:9][C:10]=3[O:11][C:12]3[CH:13]=[CH:14][C:15]([Cl:20])=[CH:16][C:17]=32)[CH2:3]1.[P:21](=[O:25])([OH:24])([OH:23])[OH:22]>C(O)C>[CH3:1][N:2]1[CH2:19][CH:18]2[CH:4]([C:5]3[CH:6]=[CH:7][CH:8]=[CH:9][C:10]=3[O:11][C:12]3[CH:13]=[CH:14][C:15]([Cl:20])=[CH:16][C:17]=32)[CH2:3]1.[P:21]([O-:25])([O-:24])([O-:23])=[O:22]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 1004Phosphoric AcidHCID 99039705-Chloro-2-methyl-2,3,3a,12b-tetrahydrodibenzo(2,3:6,7)oxepino(4,5-c)pyrrole2회

생성물 1

HCID 131737206HCID 131737206, 화합물수율 105.9%

시약·촉매·용매 1

HCID 702Ethanol용매2회

반응 조건

온도
50 °C

실험 절차

0.71 Kg of crude asenapine base (2.48 moles) and 6.7 L of ethanol are loaded into a reactor and dissolved by heating at 50° C. An 85% solution of phosphoric acid (0.17 L, 2.48 moles) in ethanol (1.0 L) is dripped into the solution of asenapine base at 50° C. in 10 minutes. The solution is stirred for 30 minutes at 50° C. The solution is cooled to 25° C. in approx. 2 hours. The solution is left under stirring at 25° C. for 2 hours. The product is isolated by filtration, washing with ethanol (1.1 L). The product is dried under vacuum at 25° C. for 20 hours. 1 Kg of asenapine phosphate is obtained (yield=94.0%). Purity >99.5% (HPLC). The IR spectrum, the DSC thermogram and the XRPD spectrum of asenapine phosphate are shown in FIGS. 1, 2 and 3 respectively. Table 1 shows the Bragg 2-theta angles (2θ), interplanar distances d and the relative intensities expressed as a percentage of the most intense diffraction peak. Table 3 shows the improvement in the quality of the product, expressed as HPLC area %, obtained in the conversion from asenapine base to asenapine phosphate. In Table 3, RRT indicates the relative retention time of the impurities present in the product obtained, compared with the retention time of asenapine.

후처리

  1. dissolutiondissolved
  2. temperatureThe solution is cooled to 25° C. in approx. 2 hours
  3. waitThe solution is left
  4. stirringunder stirring at 25° C. for 2 hours
  5. customThe product is isolated by filtration
  6. washwashing with ethanol (1.1 L)
  7. customThe product is dried under vacuum at 25° C. for 20 hours

출처 및 근거

ORD 기록
ord-f4ad76cc9b4f4d50807b9df10fec7b62
출처 데이터셋
uspto-grants-2016_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09447109B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트