홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diethyl Ether → Lytron 810

HRID 649608
인쇄

반응식

HRID 649608 반응식
[C:1]1(=[O:7])[O:6][C:4](=[O:5])[CH:3]=[CH:2]1.[CH3:8][C:9]([C:11]1[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1)=C.C(OCC)C>C(C(C)=O)C>[CH2:8]=[CH:9][C:11]1[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1.[CH:2]1[C:1](=[O:7])[O:6][C:4](=[O:5])[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 3283Diethyl EtherHCID 7407Alpha-MethylstyreneHCID 7923Maleic Anhydride

생성물 1

HCID 62707Lytron 810수율 45.4%

시약·촉매·용매 1

HCID 6569Methyl Ethyl Ketone용매

반응 조건

온도
60 °C

실험 절차

In 200 ml of methyl ethyl ketone were dissolved 18.14 g of maleic anhydride and 21.86 g of α-methylstyrene, and to the solution was added 1.82 g of azobisisobutylnitrile (AIBN). The resulting mixture was heated at 60° C. for 7 hours under nitrogen atmosphere for performing polymerization. The reaction solution was then dropwise added to 500 ml of ethyl ether under stirring to precipitate a polymer. Thus precipitated polymer was collected by filtration and purified by repeating twice the THF dissolution-ethyl ether precipitation procedure described in Example 1. Thus purified polymer was dried under vacuum at 100° C. for 24 hours to give 17.0 g of a maleic anhydride-styrene copolymer. It was confiremed by elementary analysis that the copolymerization ratio was approximately 1:1. Mn was 11,730.

후처리

  1. custompolymerization
  2. customto precipitate a polymer
  3. filtrationThus precipitated polymer was collected by filtration
  4. custompurified
  5. dissolutionthe THF dissolution-ethyl ether precipitation procedure
  6. customThus purified polymer was dried under vacuum at 100° C. for 24 hours

출처 및 근거

ORD 기록
ord-62cc2b624ec0476c8a8c832a2bb87f20
출처 데이터셋
uspto-grants-1988_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04740561

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트