홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acrylic Acid → Styrene acrylic acid copolymer

HRID 649720
인쇄

반응식

HRID 649720 반응식
[C:1]([OH:5])(=[O:4])[CH:2]=[CH2:3].[CH2:6]=[CH:7][C:8]1[CH:13]=[CH:12][CH:11]=[CH:10][CH:9]=1>C1COCC1>[C:1]([OH:5])(=[O:4])[CH:2]=[CH2:3].[CH2:6]=[CH:7][C:8]1[CH:13]=[CH:12][CH:11]=[CH:10][CH:9]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 6581Acrylic AcidHCID 7501Styrene

생성물 1

HCID 22481611Styrene acrylic acid copolymer수율 122.6%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
70 °C

실험 절차

A solution was prepared of acrylic acid (15.0 g, 0.2 mol) and styrene (10.4 g, 0.1 mol) in THF (200 mL). After the solution was degassed with a rapid stream of nitrogen, azobisisobutyronitrile (AIBN) (1.47 g, 3 mol % with respect to total monomer) was added.. The solution was degassed for a further thirty minutes and the reaction was then heated to 70° C. for 14 h. The solution was cooled and precipitated into n-hexane (800 mL). The hexane was decanted from the fibrous white product, the product was washed with ethyl acetate (300 mL) followed by washing with a further aliquot of hexane (200 mL). The polymer was dried in vacuo to yield 21.6 g, 84.6% of a brittle white solid.

후처리

  1. customAfter the solution was degassed with a rapid stream of nitrogen, azobisisobutyronitrile (AIBN) (1.47 g, 3 mol % with respect to total monomer)
  2. additionwas added
  3. customThe solution was degassed for a further thirty minutes
  4. temperatureThe solution was cooled
  5. customprecipitated into n-hexane (800 mL)
  6. customThe hexane was decanted from the fibrous white product
  7. washthe product was washed with ethyl acetate (300 mL)
  8. washby washing with a further aliquot of hexane (200 mL)
  9. customThe polymer was dried in vacuo

출처 및 근거

ORD 기록
ord-20c6a085bbcc402688b7cb4a01f8031a
출처 데이터셋
uspto-grants-2001_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06270755B1

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트