홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Bisphenol A → Ethyl Acrylate

HRID 652796
인쇄

반응식

HRID 652796 반응식
C(OCC=C)(=O)[C:2]1[C:3](=[CH:10]C=CC=1)[C:4]([O:6][CH2:7][CH:8]=C)=[O:5].[OH:19]C1C=CC(C(C2C=CC(O)=CC=2)(C)C)=CC=1>>[C:4]([O:6][CH2:7][CH3:8])(=[O:5])[CH:3]=[CH2:2].[C:4]([O:6][CH3:7])(=[O:5])[C:3]([CH3:10])=[CH2:2].[C:4]([O:6][CH2:7][CH2:8][OH:19])(=[O:5])[CH:3]=[CH2:10]
참가 물질실험 절차출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 6623Bisphenol AHCID 8560Diallyl phthalate

생성물 3

HCID 6658Methyl Methacrylate수율 28%HCID 8821Ethyl Acrylate수율 61.5%HCID 131652-Hydroxyethyl acrylate수율 10%

실험 절차

The procedure described in Example 1(A) was repeated, except that the diallyl phthalate crosslinking monomer was replaced by the aromatic diacrylate monomer available commercially as "Photomer" 4028 (Registered Trade Mark of Diamond Shamrock Co.) and which is believed to be essentially the diacrylate of bisphenol A. The amounts of the monomers were adjusted to give a polymer composition of ethyl acrylate 61.5%, methyl methacrylate 28%, 2-hydroxyethyl acrylate 10%, "Photomer" 4028 0.5%, and the amount of copolymer stabiliser solution in the main feed was increased from 294.9 parts to 368.6 parts. The final dispersion had a non-volatile content of 61.6%, a high-shear viscosity of 0.8 poise and a particle size ("Nanosizer" determination) of 0.25 μm. The gel content of the disperse phase was 89%. When the dispersion was applied to glass and allowed to dry, a good clear, flexible film was obtained; its extensibility was in excess of 1000%.

출처 및 근거

ORD 기록
ord-20fae60e41df4db8a10ccb2250ef76e5
출처 데이터셋
uspto-grants-1987_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04673703

반응 노트

이 페이지에서참가 물질실험 절차출처 및 근거반응 노트