홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Diisopropylamine → 2,2,4,4-Tetramethyl-6-ethynylchroman

HRID 6549
인쇄

반응식

HRID 6549 반응식
C(NC(C)C)(C)C.C([Li])CCC.[CH3:13][C:14]1([CH3:29])[CH2:23][C:22]([CH3:25])([CH3:24])[C:21]2[C:16](=[CH:17][CH:18]=[C:19]([C:26](=O)[CH3:27])[CH:20]=2)[O:15]1.C(OP(Cl)(OCC)=O)C.C([N-]C(C)C)(C)C.[Li+]>C1COCC1.CCCCCC>[CH3:13][C:14]1([CH3:29])[CH2:23][C:22]([CH3:24])([CH3:25])[C:21]2[C:16](=[CH:17][CH:18]=[C:19]([C:26]#[CH:27])[CH:20]=2)[O:15]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 7912Diisopropylamine2회HCID 13139Diethyl chlorophosphateHCID 2724682Lithium diisopropylamideHCID 156611361-(2,2,4,4-Tetramethyl-3,4-dihydro-2H-1-benzopyran-6-yl)ethan-1-one2회HCID 178418339Butyllithium2회

생성물 1

HCID 156611382,2,4,4-Tetramethyl-6-ethynylchroman

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매3회HCID 8058Hexane용매2회

반응 조건

온도
-78 °C

실험 절차

To a cooled (-78 degrees C.) solution of 522 mg (5.17 mmol) of diisopropylamine in 8 ml of dry THF was added slowly, under nitrogen, 3.23 ml of 1.6 M (5.17 mmol) n-butyl lithium in hexane. The mixture was stirred at -78 degrees C. for 40 minutes and then treated with a solution of 1.24 g (5.17 mmol) of 2,2,4,4-tetramethyl-6-acetylchroman (Compound 85) in 2 ml of dry THF. The mixture was stirred at -78 degrees C. for a further 1 h and then treated with 895 mg (5.19 mmol) of diethylchlorophosphate. The reaction mixture was allowed to warm to room temperature and transferred by double-ended needle into a solution of lithium diisopropylamide in THF at -78 degrees C. [prepared as described above from 1.04 g (10.34 mmol) of diisopropylamine and 6.46 ml of 1.6 M (10.34 mmol) n-butyl lithium in hexane]. The cooling bath was removed and the mixture was stirred at room temperature for 16 h. The mixture was then treated with 10 ml of ice water and acidified to a pH of 2 with 10% HCl. The organic layer was separated and the aqueous layer was extracted with 3×30 ml of pentane. The organic extracts were combined and washed successively with 2.30 ml of dilute HCl, water, 3×30 ml of saturated NaHCO3 solution and saturated NaCl solution and then dried (MgSO4). The solvent was removed in vacuo and the residue was purified by flash chromatography (silica; 2% ethyl acetate in hexane) to give the title compound as a pale yellow oil. PMR (CDCl3): δ 1.31 (6H, s), 1.32 (6H, s), 1.50 (2H, s), 3.00 (1H, s), 6.72 (1H, d, J~8.4 Hz), 7.20 (1H, dd, J~8.4 Hz, 2.1 Hz), 7.42 (1H, d, J~ 2.1 Hz). MS exact mass, m/e 214.1251 (calcd. for C15H18O, 214.1357).

후처리

  1. additionwas added slowly, under nitrogen
  2. stirringThe mixture was stirred at -78 degrees C
  3. waitfor a further 1 h
  4. temperatureto warm to room temperature
  5. customThe cooling bath was removed
  6. stirringthe mixture was stirred at room temperature for 16 h
  7. additionThe mixture was then treated with 10 ml of ice water
  8. customThe organic layer was separated
  9. extractionthe aqueous layer was extracted with 3×30 ml of pentane
  10. washwashed successively with 2.30 ml of dilute HCl, water, 3×30 ml of saturated NaHCO3 solution and saturated NaCl solution
  11. dry with materialdried (MgSO4)
  12. customThe solvent was removed in vacuo
  13. customthe residue was purified by flash chromatography (silica; 2% ethyl acetate in hexane)

출처 및 근거

ORD 기록
ord-b04cdc9bba80470aa3364e2940bee852
출처 데이터셋
uspto-grants-1993_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05248777

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트