홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 4,6-Diaminoresorcinol Dihydrochloride

HRID 703296
인쇄

반응식

HRID 703296 반응식
[N+:1]([C:4]1[CH:9]=[C:8]([N+:10]([O-])=O)[C:7]([OH:13])=[CH:6][C:5]=1[OH:14])([O-])=O.[H][H].[ClH:17].O.O.[Cl:20][Sn]Cl>O.[Cr].[Co].[Pd].C(O)CC>[ClH:20].[ClH:17].[NH2:1][C:4]1[C:5]([OH:14])=[CH:6][C:7]([OH:13])=[C:8]([NH2:10])[CH:9]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 4

HCID 313Hydrochloric AcidHCID 611584,6-DinitroresorcinolHCID 61436Stannous chloride dihydrateHCID 178418361HCID 178418361, 화합물

생성물 1

HCID 27336484,6-Diaminoresorcinol Dihydrochloride

시약·촉매·용매 4

HCID 23938Palladium촉매
HCID 11332432
Hastelloy C
촉매
HCID 962Water용매2회
HCID 10311-Propanol용매

실험 절차

A one-liter Hastelloy C autoclave equipped with a gas dispersion stirrer and cooling coil is charged with 100.0 g (0.5 mole) of the 4,6-dinitro-1,3-benzenediol, 500 ml of n-propanol, ~7.0 g of 10 percent Pd/C and 10.0 ml of H2O. The sealed reactor is charged with 50 psi of H2 and the temperature is brought to 40° C. and maintained between 40° C.-50° C. during the course of the reaction. After a brief induction period, the uptake of hydrogen becomes extremely rapid and H2 pressure is maintained at about atmospheric pressure during the reaction. Upon completion, no further uptake of H2 is observed. The reactor is cooled to room temperature, opened and 300 ml of concentrated HCl containing ~10 g of SnCl2.2H2O is added to the reaction mixture. The crude product with the catalyst is isolated by filtration. This material is dissolved in 200 g of H2O at 85° C. and the catalyst is removed by filtration. H2O (100-300 ml) is added to the filtrate along with 500 ml of HCl and the catalyst-free material is precipitated from the brown solution. Recrystallization may be carried out in the existing solvent or the semi-pure material can be isolated and air dried to afford 100 g of crude diamino resorcinol dihydrochloride (predominantly 4,6-diamino-1,3-benzenediol dihydrochloride in 95.0 mole percent yield based on the 4,6-dinitro-1,3benzenediol.

후처리

  1. temperaturecooling coil
  2. additionThe sealed reactor is charged with 50 psi of H2
  3. customis brought to 40° C.
  4. temperaturemaintained between 40° C.-50° C. during the course of the reaction
  5. temperatureH2 pressure is maintained at about atmospheric pressure during the reaction
  6. customThe crude product with the catalyst is isolated by filtration
  7. customthe catalyst is removed by filtration
  8. additionH2O (100-300 ml) is added to the filtrate along with 500 ml of HCl
  9. customthe catalyst-free material is precipitated from the brown solution
  10. customRecrystallization
  11. customthe semi-pure material can be isolated
  12. customair dried

출처 및 근거

ORD 기록
ord-eb663b0eba52405c9cd0e0c91bb9bab3
출처 데이터셋
uspto-grants-1991_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04982001

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트