홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrogen Sulfide → N-Pentyl-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide

HRID 704195
인쇄

반응식

HRID 704195 반응식
[N:1]1([CH2:6][CH:7]([N:9]2[C:22]3[CH:21]=[C:20]([C:23](=[S:25])[NH2:24])[CH:19]=[CH:18][C:17]=3[S:16][C:15]3[C:10]2=[CH:11][CH:12]=[CH:13][CH:14]=3)[CH3:8])[CH2:5][CH2:4][CH2:3][CH2:2]1.[CH2:26](N)[CH2:27][CH2:28][CH2:29][CH3:30].S>C(O)C>[CH2:26]([NH:24][C:23]([C:20]1[CH:19]=[CH:18][C:17]2[S:16][C:15]3[C:10](=[CH:11][CH:12]=[CH:13][CH:14]=3)[N:9]([CH:7]([CH3:8])[CH2:6][N:1]3[CH2:5][CH2:4][CH2:3][CH2:2]3)[C:22]=2[CH:21]=1)=[S:25])[CH2:27][CH2:28][CH2:29][CH3:30]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 402Hydrogen SulfideHCID 8060PentylamineHCID 1453652810-[1-(1-Pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide

생성물 1

HCID 14536579N-Pentyl-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide

시약·촉매·용매 1

HCID 702Ethanol용매

반응 조건

온도
100 °C

실험 절차

A suspension of 10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide (2 g) and pentylamine (3 cc) in absolute ethanol (30 cc) is saturated with hydrogen sulphide and then heated for 2 hours at a temperature in the region of 100° C. After cooling, the mixture is concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C. The pasty residue is taken up with ethyl ether (50 cc) and distilled water (15 cc). The organic phase is separated, dried over potassium carbonate and concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C. The residual viscous yellow oil is purified by chromatography on a column (height: 35 cm; diameter: 2.6 cm) of silica gel (0.2-0.063 mm), eluting with ethyl acetate (300 cc) and collecting 25-cc fractions. Fractions 3 to 9 are combined and concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C. N-Pentyl-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide (2.25 g) is thereby obtained in the form of a yellow oil. 0.55 g of this product is dissolved in isopropyl ether (20 cc), and a 3.3N solution (0.6 cc) of hydrochloric acid in isopropyl ether is introduced dropwise and with stirring. The precipitate formed is drained, washed with isopropyl ether (3×5 cc) and dried under reduced pressure (5 mm Hg; 0.68 kPa) at 40° C. N-Pentyl-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide hydrochloride (0.56 g) is thereby obtained in the form of a pale yellow powder, m.p. 155°-160° C. (melts forming a paste).

후처리

  1. temperatureAfter cooling
  2. concentrationthe mixture is concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C
  3. distillationdistilled water (15 cc)
  4. customThe organic phase is separated
  5. dry with materialdried over potassium carbonate
  6. concentrationconcentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C
  7. customThe residual viscous yellow oil is purified by chromatography on a column (height: 35 cm; diameter: 2.6 cm) of silica gel (0.2-0.063 mm)
  8. washeluting with ethyl acetate (300 cc)
  9. customcollecting 25-cc fractions
  10. concentrationconcentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C

출처 및 근거

ORD 기록
ord-7fbf153126444726b8c2115f6bcd613e
출처 데이터셋
uspto-grants-1991_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04985419

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트