홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hexane → (4,6-Dichloropyrimidin-5-yl)acetaldehyde

HRID 717566
인쇄

반응식

HRID 717566 반응식
[CH2:1]([C:4]1[C:5]([Cl:11])=[N:6][CH:7]=[N:8][C:9]=1[Cl:10])[CH:2]=C.C[N+]1([O-])CC[O:16]CC1.CCCCCC>O1CCOCC1.[Os](=O)(=O)(=O)=O>[Cl:11][C:5]1[C:4]([CH2:1][CH:2]=[O:16])=[C:9]([Cl:10])[N:8]=[CH:7][N:6]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 8058HexaneHCID 82029Methyl morpholine oxideHCID 5192085-Allyl-4,6-dichloropyrimidine

생성물 1

HCID 13989292(4,6-Dichloropyrimidin-5-yl)acetaldehyde수율 67.3%

시약·촉매·용매 2

HCID 30318Osmium Tetroxide촉매HCID 312751,4-Dioxane
용매

실험 절차

To a stirred solution of 5-allyl-4,6-dichloropyrimidine (2.5 g) in dry dioxane (25 mL), N-methyl morpholine N-oxide (2.3 g) and osmium tetroxide (0.85 mL, 25% solution in water) were added. The reaction mixture was stirred at room temperature for 2 hours before being quenched by solid sodium bisulphate. The reaction mixture was filtered through celite bed. The celite bed was washed with dioxane (10 mL). The combined filtrate was taken into a 100 mL three necked round bottom flask and sodium metaperiodate (6 g, in 5 mL water) was added. The reaction mixture was stirred at room temperature for about 3 hours, then diluted with water (30 mL). Aqueous layer was extracted with dichloromethane (2×25 mL). The combined organic layer was washed with brine (50 mL) and dried over anhydrous Na2SO4. Evaporation of solvents under reduced pressure gave crude product, which was treated with hexane to offer a solid. The solid obtained was filtered, washed with cold hexane (50 mL) and dried under vacuum to get 2-(4,6-dichloropyrimidin-5-yl)acetaldehyde (1.7 g) as white solid. 1H NMR (DMSO-d6): δ 4.21 (s, 2H), 8.86 (s, 1H), 9.7 (s, 1H).

후처리

  1. custombefore being quenched by solid sodium bisulphate
  2. filtrationThe reaction mixture was filtered through celite bed
  3. washThe celite bed was washed with dioxane (10 mL)
  4. additionwas added
  5. stirringThe reaction mixture was stirred at room temperature for about 3 hours
  6. additiondiluted with water (30 mL)
  7. extractionAqueous layer was extracted with dichloromethane (2×25 mL)
  8. washThe combined organic layer was washed with brine (50 mL)
  9. dry with materialdried over anhydrous Na2SO4
  10. customEvaporation of solvents under reduced pressure
  11. customgave crude product, which
  12. customThe solid obtained
  13. filtrationwas filtered
  14. washwashed with cold hexane (50 mL)
  15. customdried under vacuum

출처 및 근거

ORD 기록
ord-d3d0ead1772a49ff8fb3a8be3fd7291b
출처 데이터셋
uspto-grants-2015_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09193725B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트