홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Sulfuric Acid → Zirconium hydroxide (Zr(OH)4), (T-4)-

HRID 718478
인쇄

반응식

HRID 718478 반응식
[Si:1]([O-])([O-])([O-])[O-:2].[Na+].[Na+].[Na+].[Na+].S(=O)(=O)(O)[OH:11].[O:15](Cl)Cl.[Zr:18].[OH-:19].[Na+].[O:21]=[Al-:22]=O.[Na+]>O>[OH-:2].[Si+4:1].[OH-:11].[OH-:15].[OH-:21].[OH-:19].[Zr+4:18].[OH-:2].[OH-:2].[OH-:2].[OH-:2].[Al+3:22].[OH-:2].[OH-:2]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 5

HCID 1118Sulfuric Acid2회HCID 14766Sodium aluminateHCID 14798Sodium HydroxideHCID 26051Sodium orthosilicateHCID 71304769Chloro hypochlorite;zirconium

생성물 3

HCID 84465Zirconium hydroxide (Zr(OH)4), (T-4)-
HCID 10176082
Aluminum Hydroxide
HCID 23617461Silicon(4+) tetrahydroxide

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
80 °C

실험 절차

TiO2 particles (average particle diameter: 0.26 μm) produced through sulfuric acid process was added to water, to prepare aqueous slurry (TiO2 concentration: 400 g/L). This slurry (0.5 L) was heated to 80° C. under stirring. While maintaining this temperature, a 150 g/L aqueous solution of sodium silicate, which corresponded to 5% by mass (in terms of SiO2) of TiO2, was added to the slurry. Then, 30% sulfuric acid was added thereto over 120 minutes such that the pH of the mixture should be 7. The resultant slurry was aged for 30 minutes. Next, under stirring, the temperature of the slurry was regulated so as to be 40° C. While the pH of the slurry was maintained to 7, a 100 g/L aqueous solution of zirconium oxychloride, which corresponded to 1% by mass (in terms of ZrO2) of TiO2, and 30% aqueous sodium hydroxide were added to the slurry as a single portion over 60 minutes. The resultant slurry was aged for 30 minutes. Then, under stirring, while the pH of the slurry was maintained to 7, a 250 g/L aqueous solution of sodium aluminate, which corresponded to 2% by mass (in terms of Al2O3) of TiO2, and 30% sulfuric acid were added as a single portion to the slurry over 60 minutes. The resultant slurry was aged for 60 minutes. Thus, on the surface of TiO2, coating layers of silicon hydroxide, zirconium hydroxide, and aluminum hydroxide were formed in the order as set forth.

후처리

  1. customto prepare aqueous slurry (TiO2 concentration: 400 g/L)
  2. temperatureWhile maintaining this temperature
  3. additionwas added to the slurry
  4. waitThe resultant slurry was aged for 30 minutes
  5. stirringNext, under stirring
  6. customto be 40° C
  7. temperatureWhile the pH of the slurry was maintained to 7
  8. additionwere added to the slurry as a single portion over 60 minutes
  9. waitThe resultant slurry was aged for 30 minutes
  10. stirringThen, under stirring, while the pH of the slurry
  11. temperaturewas maintained to 7
  12. additionwere added as a single portion to the slurry over 60 minutes
  13. waitThe resultant slurry was aged for 60 minutes

출처 및 근거

ORD 기록
ord-4139525a7c304b3592f834181e6f5b84
출처 데이터셋
uspto-grants-2015_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09193871B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트