홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrogen Sulfide → N-[(2RS)-2-Methylbutyl]-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide

HRID 728720
인쇄

반응식

HRID 728720 반응식
[N:1]1([CH2:6][CH:7]([N:9]2[C:22]3[CH:21]=[C:20]([C:23](=[S:25])[NH2:24])[CH:19]=[CH:18][C:17]=3[S:16][C:15]3[C:10]2=[CH:11][CH:12]=[CH:13][CH:14]=3)[CH3:8])[CH2:5][CH2:4][CH2:3][CH2:2]1.[CH3:26][CH:27]([CH2:30][CH3:31])[CH2:28]N.S>C(O)C>[CH3:26][CH:27]([CH2:30][CH3:31])[CH2:28][NH:24][C:23]([C:20]1[CH:19]=[CH:18][C:17]2[S:16][C:15]3[C:10](=[CH:11][CH:12]=[CH:13][CH:14]=3)[N:9]([CH:7]([CH3:8])[CH2:6][N:1]3[CH2:5][CH2:4][CH2:3][CH2:2]3)[C:22]=2[CH:21]=1)=[S:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 402Hydrogen SulfideHCID 72832-MethylbutylamineHCID 1453652810-[1-(1-Pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide

생성물 1

HCID 14536584N-[(2RS)-2-Methylbutyl]-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide

시약·촉매·용매 1

HCID 702Ethanol용매

반응 조건

온도
115 °C

실험 절차

A stirred suspension of 10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide (2 g) and 2-methylbutylamine (3 cc) in anhydrous ethanol (15 cc) is saturated with hydrogen sulphide and the mixture is heated for 1 hour to a temperature in the region of 115° C. After being cooled, the mixture is concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 50° C. The residual yellow paste is taken up with ethyl acetate (30 cc) and distilled water (20 cc). The organic phase is separated, washed with saturated aqueous sodium chloride solution (20 cc), dried over magnesium sulphate, filtered and concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C. The residual viscous yellow oil (2.2 g) is purified by chromatography on a column (height: 40 cm; diameter: 3.2 cm) of silica gel (0.04-0.063 mm), eluting with a mixture (92:8 by volume) (300 cc) of ethyl acetate and methanol and collecting 25-cc fractions. Fractions 6 to 11 are combined and concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C. N-[(2RS)-2-Methylbutyl]-10-[(2RS)-1-(1-pyrrolidinyl)-2-propyl]-2-phenothiazinecarbothioamide (1.8 g) is thereby obtained in the form of a viscous yellow oil.

후처리

  1. temperatureAfter being cooled
  2. concentrationthe mixture is concentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 50° C
  3. distillationdistilled water (20 cc)
  4. customThe organic phase is separated
  5. washwashed with saturated aqueous sodium chloride solution (20 cc)
  6. dry with materialdried over magnesium sulphate
  7. filtrationfiltered
  8. concentrationconcentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C
  9. customThe residual viscous yellow oil (2.2 g) is purified by chromatography on a column (height: 40 cm; diameter: 3.2 cm) of silica gel (0.04-0.063 mm)
  10. washeluting with a mixture (92:8 by volume) (300 cc) of ethyl acetate and methanol
  11. customcollecting 25-cc fractions
  12. concentrationconcentrated to dryness under reduced pressure (30 mm Hg; 4 kPa) at 40° C

출처 및 근거

ORD 기록
ord-022907d178a44bdc826dc2e39ef5122c
출처 데이터셋
uspto-grants-1991_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05049669

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트